10 pcs RC Model Fuel Pipe Clamp 5mm/6mm Joint Spring-loaded Hose Clamps Fuel Hose Line Fastener Clips
Features
Pipe clip (5mm 6mm) Pipe tank connection essential
There are 5MM 6MM two specifications for selection, suitable for fixed use of carburetor oil nozzle, gasoline engine methanol engine are suitable.
It can prevent tubing from falling off, stainless steel chrome-plated color, corrosion resistance, without brim, and protect tubing.
360 degree inner ring precision design, a complete circle after sealing, good sealing performance.
Non-burr edge material treatment, no injury to the tube.
After effective dehydrogenation treatment, long-term use does not need to worry about fracture and other issues.
Easy to install and reuse.
The elastic action of the clamp can compensate for the shrinkage caused by heat and cold or aging of the hose.
Description
Model : Fual Pipe Clamp
Type : 5MM/6MM
The inner diameter of 5mm clamp is about 4.7 mm and that of 6mm is about 5.5 mm.
Note:
Use a needle nose plier to clamp the ears to enlarge the inner ring, sleeve in hose, release and clamp
How to choose spring clamp?
Reference Method 1: Tube Outer Diameter = Spring Clamp Diameter
The outside diameter of the pipe to be clamped is as large as the diameter of the spring clamp.
Attention: At this time, the pipe is not connected and the outside diameter of the pipe after normal connection will be enlarged.
For example, if the outside diameter of the pipe is 5mm, we will choose the spring clamp with 5mm diameter.
Reference Method 2: This method is more accurate.
The outer diameter of the pipe connected is 1 mm larger than the outer diameter of the pipe. For example, if the outer diameter of the connecting pipe is 6 mm, then we choose a 5 mm spring clamp.
Pacakge Included
10 x Clamp
