Specification:
Brand Name: cooltech
Item Name: D8-1 receiver
Working Temperature Range: -10~+80â
Operating Voltage Range : 3.5~15.0V
Dimension: 25X16.8X5mm
Weight: 2g
Receiving Mode: D8 mode
Operating Range: Full range
Number of Channnels: 8CH from S.BUS channel
Features:
Features:
-Ultra mini size and light weight
-Support telemetry data transmission
-Replaceable antennas
-Upgradeable firmware
-Rather long operating range with PA
Binding procedure:
Binding procedure:
1. Turn on the transmitter, get to the MANU- MODEL SETUP and select BIND. Connect battery to the receiver while
holding the F/S button on the receiver, the LED on the receiver will be off, indicating the binding process is completed.
holding the F/S button on the receiver, the LED on the receiver will be off, indicating the binding process is completed.
2. Reboot the receiver and go back to mormal mode of transmitter RF, the red light on the receiver indicates the
receiver is receiving commands from the transmitter.
Failsafe:
A constant failsafe is preset in D8-1 receiver, when control signal is lost, Channel 3 will be set to cut off and the orther
channel goes to central position, so channel 3 is suggested in throttle.
Package included:
1x D8-1 receiver
receiver is receiving commands from the transmitter.
Failsafe:
A constant failsafe is preset in D8-1 receiver, when control signal is lost, Channel 3 will be set to cut off and the orther
channel goes to central position, so channel 3 is suggested in throttle.
Package included:
1x D8-1 receiver
![DJI Neo - 10 Reasons Buy or [ Not Buy ]. - UCwojJxGQ0SNeVV09mKlnonA](https://i4.ytimg.com/vi/lG4mCfL_Rlw/hqdefault.jpg)
