This PDB distributes power from a battery pack to 4 ESCs, as well as providing synchronised & regulated
DC outputs for powering cameras, servos, VTX, LEDs, etc. Batteries may range from 3S to 6S LiPo.
It also features convenient solder bridge of various voltage for camera & VTX.
Description:
Brand name: AKK
Model: No.1
Item name: PDB Power Distribution Board
Input voltage range (3S-6S operation): 9-26VDC
Model: No.1
Item name: PDB Power Distribution Board
Input voltage range (3S-6S operation): 9-26VDC
Regulated 5V and 12V outputs
LED power indicators (5V & 12V outputs)
4 ESC outputs
Dimension: 36 x 36mm
Weight: 6g
Mounting holes: 30.5mm
ESC outputs:
* Continuous current: 20A per output
* Peak current (10 seconds/minute): 25A per output
BEC 5V output:
* Designed for RC Receivers, Flight controllers, OSD, and Servos.
* DC/DC synchronous buck regulator, high efficiency.
* Voltage: 5.0 +/- 0.2VDC
* Continuous current: 3 Amps
* Short-circuit tolerant (10 seconds/minute)
* LED (indicates voltage is in regulation)
BEC 12V output:
* The battery should be 4S-6S Lipo
* Standard output designed to power cameras and VTX, etc.
* Voltage: 12.0 +/- 0.2VDC
* Continuous current: 2 Amps (Max. 3A 10s/minute)
* Short-circuit tolerant (10 seconds/minute)
* LED (indicates voltage is in regulation)
CAM & VTX voltage bridge:
* 3S operation. choose "VCC" for 12V camera & 12V VTX, VCC=Battery Voltage.
* 4~6S operation, choose "12" for 12V camera & 12V VTX.
* 3~6S operation, choose "5" for 5V camera.
* Video pass through from the "CAM" pad to "VTX" pad.
Features:
* ESC & Battery solder pads in pairs
* Solder Bridges of various voltage for Camera & VTX.
* 5V & 12V Output LED indicators & Short circuit tolerant
* 4 ESC outputs
Package Included:
1x AKK NO.1 PDB Power Distribution Board
Package Included:
1x AKK NO.1 PDB Power Distribution Board
