The TBS Crossfire Nano receiver with minimal T Crossfire antenna is available on the Meteor series for all CRSF users. This specific variation is only designed to be small, light, and easy to use.
Meteor75, a better approach to the 75mm micro drone which features high KV motors - 1102 18000KV motors & BT2.0 450mAH battery, giving pilots plenty of power to use both indoor and outdoor spaces as a small scale acro playground.
Bullet Point
-Meteor75 is the first generation whoop powered by brand-new BT2.0 connector 450mAh battery. The BT2.0 connector
effectively decreases internal connector resistance for a much better discharge performance compare with initial PH2.0
connector
-The power system uses the latest 1102 18000KV motors and 40mm 3-blade props, which provides pilots stronger
experience of a powerful indoor and outdoor flight
-1102-18000KV motors paired with durable ball bearings for increasing flight time/performance and low
maintenance, while it adopts PCB connector to allow you repair it easier once it's disconnected
-Flight controller pre-soldered the BT2.0 cable, which can provide more stable and powerful 9A continuous current
-Comes with an injection molding canopy, more durable and weighs only 1.5g
-The package comes with BT2.0 450mAh 1S lipo and BT2.0-PH2.0 adapter cable. he adapter cable is convenient for charging BT2.0 battery with your stock PH2.0 charger. Meanwhile, we have also released BT2.0 Lipo Charger Board to
charge 6pcs battery at the same time
Specification
FC&ESC: F4 1-2S AIO Brushless FC
Frame: Beta75 Pro 2 Whoop Frame
Motors: 1102 18000KV motor
Props: 40mm 3-Blade Propellers (1.5mm Shaft)
VTX&Camera: M01 AIO Camera VTX
Receiver Option: Frsky XM / DSMX / Futaba S-FHSS / TBS Crossfire
Battery: BT2.0 450mAh 1S 30C Battery
Flight time: 3-4min
Weight: 28.7g (without battery)
Flight Controller
We use the classical F4 1-2S AIO Brushless FC on Meteor75 drone. Why not the lighter F4 1S AIO Brushless FC board?
The burst current of the Meteor75 could up to 15A even on 1S power. This F4 1-2S FC board could hold so high
current in continue flying. Of course, the 1g difference in weight is no sense to such a beast drone.
This AIO F4 FC is suitable for a light 1-2S whoop drone perfectly, Integrated with a Betaflight F411 processor FC,
Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC.
SPECIFICATIONS OF FC & ESC
CPU: STM32F411
Six-Axis: MPU6000
Built-in 1-2S ESC with 5A continuous and peak 6A current
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Injection Molded Canopy
Since Meteor75 whoop drone, we will use an injection molded canopy, which is only 1.5g with camera holder. Of course, much durable than the original canopy.
M01 AIO Camera VTX- The unit is ultra-lightweight only 3g, perfect for Meteor75. It comes with a super Mini 5.8GHz FPV
Transmitter + 800TVL C01 Camera + RG178 Antenna, features 6 bands and 37 channels on the 5.8GHz band with Raceband.
Motors
1102 18000KV motors have a great balance between weight and power on this tiny 75mm 1S whoop drones. Only 2.9g with connectors. With the high 18000KV value, it could have a great punch power even only 1S battery. Also, it adopts PCB connector to allow you to repair it easier once cables disconnected.
Package Included:
1 * Meteor75 Brushless Whoop Quadcopter (1S)
1 * 450mAh 1S 30C Battery with BT2.0 connector
1 * BT2.0-PH2.0 Adapter cable
