Eachine VTX03S + Caddx Turbo EOS2 0/25/50/100/200mw 40CH 5.8G FPV Transmitter 4:3 1200TVL 2.1mm Mini FPV Camera with 3.7V 500mAh LiPo Battery
VTX03S VTX
Download : User Manual
VTX03S VTX
Download : User Manual
Specification:
Brand name: Eachine
Item name: VTX03S FPV Transmitter
Output power: 25mW/50mW/100mW/200mW switchable
Input voltage: 3.3-5.5V
5V camera supply, 530mA(MAX)[email protected]
5V camera supply, 450mA(MAX)[email protected]
5V camera supply, 360mA(MAX)[email protected]
5V camera supply, 280mA(MAX)[email protected]
Video system: NTSC/PAL
Antenna dimensions: 55mm X 5mm diameter
Antenna: IPEX
Size: 21.43*15.20mm(L*W)
Weight: 2.97g
Features:
Smartaudio Function
PITmode
Support 0.01mW Parameter-adjusting Mode
25mW/50mW/100mW/200mW power switchable
One button frequency and power setup
OSD configuration using FC Uart(F3/F4/F7 with OSD)
5V to camera@under 300mA
Adopt button instead of toggle, convenient operation
1S lipo power supply
Power Off Memory
Operation:
Channel select
Short-Press the button to change channel(CH),digital display will change synchronously .Digital display changes cyclically from 1 to 8
Band Select
Press button for 2S ,Blue LED display will flicker ,then short presses to select 5 band A/B/E/F/r sequentially.
Power select
Press button for 4S.Blue LED display “0” will flicker,then short presses to select power 25mW/50mW/100mW/200mW sequentially.
Notice:(Number “1” stand for 25mw;Number “2” stand for 50mw,Number “3” stand for 100mw,Number “4” stand for 200mw)
Parameter-adjusting Mode(0.01mW)
While in P Mode you can change channels and set power levels, with the button,but none of these changes will take effect until you quit P Mode.By default,P Mode will send a very weak signal.
Exit Parameter-adjusting Mode
Two ways to exit P Mode:
Press button for 12 seconds to exit P Mode
Turn “Race” to “Free” blew the “ OP Model” sub-category on OSD display and power to reboot
Notice: The VTX has memory for settings. To change the settings,please repeat steps as above.
Operation:
Channel select
Short-Press the button to change channel(CH),digital display will change synchronously .Digital display changes cyclically from 1 to 8
Band Select
Press button for 2S ,Blue LED display will flicker ,then short presses to select 5 band A/B/E/F/r sequentially.
Power select
Press button for 4S.Blue LED display “0” will flicker,then short presses to select power 25mW/50mW/100mW/200mW sequentially.
Notice:(Number “1” stand for 25mw;Number “2” stand for 50mw,Number “3” stand for 100mw,Number “4” stand for 200mw)
Parameter-adjusting Mode(0.01mW)
While in P Mode you can change channels and set power levels, with the button,but none of these changes will take effect until you quit P Mode.By default,P Mode will send a very weak signal.
Exit Parameter-adjusting Mode
Two ways to exit P Mode:
Press button for 12 seconds to exit P Mode
Turn “Race” to “Free” blew the “ OP Model” sub-category on OSD display and power to reboot
Notice: The VTX has memory for settings. To change the settings,please repeat steps as above.
Cable Connections:
Red(3.3V-5V)
Black(GND)
Green(smartaudio)
Red(5VCAM)
Black(GND)
Yellow(Video In)
CAMERA
Description
| Model | Turbo EOS2 |
| Image Sensor | 1/3" CMOS Sensor |
| Horizontal Resolution | 1200 TVL |
| TV System | NTSC / PAL option |
| IMAGE | 4:3 |
| Synchronization | Internal |
| Electronic Shutter | PAL: 1/50~100,000; NTSC: 1/60~100,000 |
| S/N Ratio | >52dB (AGC OFF) |
| Video Output | CVBS |
| Lens | 2.1mm |
| Min. Illumination | [email protected] |
| Auto Gain Control | YES |
| BLC | YES |
| WDR | Global WDR |
| DNR | 2 DNR |
| Dimensions | 14mm*14mm*16mm |
| Wide Power Input | DC 3.3-6V |
| Work Temperature | -20â~+60â |
| Work Humidity | 20%~80% |
| Weight | 3.5g (N.W.) |
BATTERY
Brand Name : Eachine
Item Name : VR006 500mAh 3.7V Battery
Connector : Molex Pico 1.25mm
Size : 41.7mm x 30.1mm x 3.5mm
Weight : 9g
Size : 41.7mm x 30.1mm x 3.5mm
Weight : 9g
Package Included:
1 x Eachine VTX03S Transmitter
1 x Camera
1 x Molex Picoblade 1.25mm 3pin FPV silicone cable
1 x Screws set
1 x Battery
1 x Battery
![DJI Neo - 10 Reasons Buy or [ Not Buy ]. - UCwojJxGQ0SNeVV09mKlnonA](https://i4.ytimg.com/vi/lG4mCfL_Rlw/hqdefault.jpg)
