Eaglet - 85 85mm Mini FPV Racing Drone - PNP

Description:
Eaglet - 85 85mm mini FPV racing drone is a brilliant racer which has a great potential to bring you the unprecedented flight. You just need to attach a 2 - 3S LiPo onto it, then, you are able to enjoy piloting the drone at a high speed with maximum immersion. More importantly, you are allowed to adjust the parameters via BetaFlight ground station or with the transmitter, know the real-time RSSI and brake whenever you like.

Main Features:
● Efficient flight because of the 85mm wheelbase, aerodynamic canopy, and 1104 7500KV brushless motors
● Minicube F3 flight controller supports CleanFlight and BetaFlight; self-balancing, semi-self-balancing and manual mode
● OSD and ESC settings can be adjusted remotely by the BetaFlight ground station and the transmitter respectively
● BLHeli - S ESC uses DShot600 ( default ) to ensure the anti-interference and fast responses for freewheeling
● 600TVL CMOS camera works with the CM27T 5.8G 48CH 25mW VTX, offering you the real-time FPV within 150m

Specifications:
General
Wheelbase: 85mm
Size: 113 x 114 x 52mm
Weight: 60g ( not including battery )
Frame: 3K carbon fiber
Brushless motor: 1104 7500KV
Brushless ESC: 4-in-1 BLHeli - S 10A
Propeller: 1.9 inch five-blade
Camera: 600TVL CMOS
Video transmitter: CM275T 5.8G 48CH 25mW
Flight controller: Minicube BetaFlight F3 6DOF
Buzzer: with LED light
Compatible receiver: DSM / SBUS / PPM
RSSI: support

Minicube F3 6DOF Flight Controller
Size: 27 x 27 x 5mm
Mounting hole: 20 x 20mm
Processor: STM32F303 MCU
IMU: MPU6000 SPI
OSD: BetaFlight OSD
Firmware: OMNIBUSF3 BetaFlight 3.1 DShot

Minicube 4-in-1 BLHeli - S 10A ESC
Size: 27 x 27 x 5mm
Mounting hole: 20 x 20mm
Power supply: 2 - 3S LiPo
Continuous current: 4 x 10A
Burst current: 4 x 15A ( up to 10s )
BEC output: 5V 1A
Firmware: BLHeli - S 16.5
BetaFlight passthrough ready
DShot600 ready ( default )
Programmable: yes

Recommendation:
Power source: 7.4V 500mAh 50C ( not included )
Estimated flight time: 3 - 5 minutes