Emax Tinyhawk Indoor FPV Racing Drone BNF RTF F4 4in1 3A 15000KV 37CH 25mW 600TVL
Note:
BNF(Bind-N-Fly) Comes with Drone Only!
RTF(Ready-To-Fly) Comes with Drone+Goggles+Controller!
Specification:
Brand name: Emax
Item name: Tinyhawk
| Item | Specification |
| Main PCB | Flight Controller: F4 (MATEKF411 firmware) ESCs: 4in1 3A Receiver: EMAX Tiny receiver (Compatible with Frsky D8 mode) |
| Motor | Stator: 8mm x 2.5mm (08025) KV: 15000kv Weight: 2.5g Bearing Size: Φ1.5*Φ4*2mm Shaft Diameter: Φ1.5mm |
| Propeller | Diameter: 40mm Blades: 3 Pitch: 23mm Weight: 0.5 g |
| Camera and VTX | VTX Power: 25mw Channels: 37CH Camera Properties: 600TVL CMOS |
| Battery | Voltage: 1s 4.35v HV Capacity: 450 mAh Discharge rating: 80c/160c |
| Goggles(RTF Only) | EMAX Transporter Goggles Specifications: Maximum appearance size 140Ã153Ã90(mm) Weight (without battery) 398g Resolution 480Ã272 Battery 1 cell 18650 lipo battery |
| Transmitter(RTF Only) | EMAX E6 Transmitter Specifications: Maximum appearance size 181Ã213Ã80(mm) Weight (without battery) 211g Number of channels 6 Channels Transmission frequency 2.4GHz ISM Band(2400MHz~2483.5MHz) Output Power 22dbm Modulation GFSK Battery 1 cell 18650 lipo battery |
Feature:
- 75mm Indoor racing drone
- 08025 brushless motor with durable ball bearing for increase flight and low maintenance
- Durable polypropylene plastic frame with propeller guards
- Motor beeper function. Find your tinyhawk after a crash
- Speeds up to 56kph
- Up to 4 minutes flight time on single battery
- Fast F4 Processor for smooth stable flight characteristics
- MPU6000 gyro for vibration free operations
- Unique inverted motor design to keep CG as low as possible to fit in the smallest of spaces
- 25mw VTX and 600tvl Camera included for fun FPV flight via FPV style goggles
- Smart Audio function to change VTX channel via your transmitter
- OSD settings control to customize flight feel
- Pre-tuned from factory with expert pilots and new pilots in mind. 3 rate profile settings for all types of flying feel
- Plug in type motors for easy maintenance
- 1s High Voltage (HV) 450mah lipo included
- Frsky compatible D8 receiver built in to FC
- Custom carbon fiber themed carrying case
Recommend parts (Not Included):
Frame kit: Click 75mm Polypropylene Frame Kit
Motor: Click 0802 Motor
Propeller: Click Tinyhawk Avan Propeller
Battery: Click Tinyhawk 1S 80C/160C HV 450mah Lipo Battery
LED LED Strip Light : Click 1M 2.5mm LED Non-Waterproof 60 LED Strip Light
BNF Version:
1 x Tinyhawk FPV Racing Drone
1 x Light weight soft carry case, with carbon fiber look
1 x USB High Voltage capable 4 port USB Charger
1 x 1s High Voltage (HV) 450mah lipo battery
RTF Version:
1 x Tinyhawk FPV Racing Drone
1 x Light weight soft carry case, with carbon fiber look
1 x USB High Voltage capable 4 port USB Charger
1 x 1s High Voltage (HV) 450mah lipo battery
1 x FPV Goggles
1 x Transmitter
1 x USB Cable for charging goggle, radio
1 x Parts Bag
1 x Phillips screwdriver
2 x 18650 Battery already pre-installed
1 Set spare AVAN Tinyhawk 3 blade propellers.
