FuriBee BISON 150mm Micro FPV Racing Drone

Description:
FuriBee BISON 150mm micro FPV racing drone features the robust build and strong force. Compared with other high-quality racing frames, its chassis is 25 percent thicker, i.e. more durable under huge impact.
It can fly insanely at a super high speed with the SE1806 2300KV brushless motors, thrilling you all the time after it takes off. However, the extraordinary racer is always in your control and it can respond to your commands immediately with the high-performance F4 flight controller and the 4-in-1 DShot ESC.
FuriBee BISON FPV racing drone has no rivals! Rush to get your victory!

Main Features:
● Strong carbon fiber frame, with crashproof 4mm bottom board, 2mm side board
● Exceptional power system - dys SE1806 2300KV motors and 4-in-1 28A DShot ESC
● F4 flight controller with OSD and the latest OMNIBUS F4 BetaFlight firmware
● Optimum real-time FPV with 600TVL CCD camera, 2.1mm lens, 160-degree FOV
● 1km long image transmission range, 0 / 25 / 100 / 200mW adjustable via OSD menu

Specifications:
General
Flight controller: ARF4 - 3AOM F4
Motor: dys SE1806 2300KV
ESC: BLHeli - S 28A 4-in-1
Propeller: 3052 three-blade
FPV camera: 600TVL CCD 2.1mm 160-degree FOV
Video transmitter: FB200T 5.8G 48CH 0 / 25 / 100 / 200mW
Image transmission distance: 0.5km or more ( 25mW ); 0.8km or more ( 100mW ); 1km or more ( 200mW )
Supported receiver: DSM2 / DSMX / PPM / SBUS / IBUS
Antenna: pagoda, with SMA male connector
Battery connector: XT30

Carbon Fiber Frame
Wheelbase: 150mm
Chassis thickness: 4mm
Side board thickness: 2mm

dys SE1806 Brushless Motor
KV rating: 2300KV
Bearing: the latest imported NMB bearings
Shaft material: high-strength titanium alloy
Max. thrust: 600g / piece

ARF4 - 3AOM Flight Controller
MCU: STM32F405RGT6
IMU: MPU6000 ( SPI )
OSD: BetaFlight OSD
Micro black box: built-in
Firmware version: OMNIBUS F4 BetaFlight 3.2.0
BEC output: 5V 3A ( max. )

AR BLHeli - S 28A 4-in-1 ESC
Firmware: BLHeli - S 16.6
Processor: EFM8BB21F16G
MOSFET: AON7418
Driver: new-generation 3-in-1 MOSFET
Input power: 2 - 4S LiPo / HV LiPo
Brake function: on ( default )

FPV Camera
Image sensor: 1/3 inch Super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.1mm ( M8 ) 160-degree FOV
Signal system: NTSC
One touch scene setting: Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight
S/N ratio: more than 60dB ( AGC off )
Electronic shutter speed: 1/60 to 100,000 second
Auto gain control ( AGC ): yes
Min. illumination: 0.01 lux at 1.2F
WDR: D-WDR
DNR: 2DNR
Input voltage: 5 - 36V DC
Current: 60mA at 12V / 130mA at 5V
Net weight: 5.6g
Dimension: 19 x 19 x 19mm

Note:
The colors ( transparent, black, blue, red and yellow ) of the propellers will be sent randomly.