Features:
- HD recording no propellers in view
- 3-inch propeller with guard(New Propeller Guard: Better airflow, higher flight efficiency).
- Runcam Hybrid 4K Video Recording: 4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
- Dual Camera System: True 145° Wide Angle 4K HD & FPV Camera.
- STABLE V2 F4 30A SYSTEM.
- 500mW VTX Power: Effectively improves your flight distance.
- Full Soft Mounted FC System: Provides a clean operating environment for gyro.
- Say Goodbye to Jelly: Stable video, and comfortable FOV.
- Improved GEP-CX3 Frame: Full 3K carbon fiber, 7075 aviation aluminum, High-precision CNC. Rugged and durable frame, Better protection for the 4K camera.
- New Propeller Guard: Better airflow, Higher flight efficiency.
- High Efficiency Motor: GEP-GR1206 3600KV Motors.
- Taillight Design: Eye-catching night view and lighting effects.
- Exquisite Assembly Process: Eliminate any potential installation problems.
Specification:
- Model Name: CineQueen 4K
- SYSTEM:STABLE V2 F4 30A
- Camera:Runcam Hybrid 4K
- Motor:GEP-GR1206 3600KV
- Propeller:3inch 3-blade
- VTX 5.8G 500mW
- Antenna:Momoda 5.8G RHCP
- Input Battery: 3-4S(4S 650mAh – 4S 850mAh)
- Receiver option: Frsky XM+ / Frsky R-XSR / TBS NanoRX / FlySky A8SV2
- Weight:156g(without battery)
Frame:
- Frame Model:GEP-CQ3(Improved version,Including Guards)
- Full 3K carbon fiber
- Wheelbase:145mm
- #7075 Aviation aluminum CNC
- High efficiency 3-inch guard
- Top plate thickness:3mm
- Bottom plate thickness:3mm
Electronic System:
STABLE V2 F4 Flight Controller Specs:
- MCU: F405
- IMU: MPU6000 gyro/accelerometer (SPI)
- OSD: BetaFlight OSD w/ AT7456E chip
- Baro:NO
- BEC Output: 5V@3A
- Integrated LC Filter
- Firmware target: OmnibusF4SD
STABLE V2 F4 ESC 4in1 Specs:
- Constant:30Amps
- Burst:35Amps
- Supports Dshot600,Proshot,Oneshot,Multishot
- Current meter: Yes
- Target: G_H_30
STABLE F4 5.8g 500mW VTX Specs:
- Channel: 48
- Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
- Connector type: MMCX Connector
- Traditional button
- IRC Tramp protocol
STABLE F4 Manual:GEPRC-STABLE-V2-F4-MANUAL-V1_0.pdf
Specifications(Runcam Hybrid 4K):
- HD sensor:SONY 8MP
- Analog sensor:SONY 1.3MP
- Field of View (FOV):HD Recording FOV 145°(FPV FOV 150° @ 4: 3)
- Video Resolution:4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
- TV Mode:NTSC (720*480)/PAL (720*576) Switchable
- Interface:HD supports UART remote control; FPV(Analog) supports UART fimrware update.
- Lens Specs: HD Lens : M10 FPV Lens : M8
- Power Input:DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.)
- Working Current:480mA @5V / 140mA @12V
Max Micro SD Card Supported: Up to 128G. U3 recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.
Runcam Hybrid 4K:
Include:
- 1 x CineQueen 4K Hybrid Quadcopter
