Main Features:
Helifar Turtles is an extraordinary micro FPV racing drone with 3mm thick 3K carbon fiber chassis. Compared with smaller multirotors, it is more powerful, due to the 1306 3100KV brushless motor and 3030 four-blade propeller. Therefore, you can enjoy flying it at a high speed outdoors. In comparison with bigger drones, it features higher maneuverability because of the light weight and small size. More importantly, with the RunCam Micro Sparrow camera, you are sure to be satisfied with the real-time FPV.
Note:
The color ( red, blue, black, yellow, purple, white ) of the propeller will be sent randomly
Specification:
- Brand Name: Helifar
- Model: turtle
- Wheelbase: 135mm
- Arm Plate Thickness: 3mm
- Bottom Plate Thickness: 3mm
- Side Plate Thickness: 1.5mm
- Material: carbon fiber
- Weight: 38g
- Drone Weight: 106gï¼battery not included ï¼
F3 Flight Controller:
- Micro F3 Flight Control Board ( D-Shot Version )
- MPU: MPU6000 - SPI
- CPU: STM32F303
- Buzzer: support
- LED Strip: support
- Input Voltage: 2-4S Lipo
- Built-in Betaflight OSD to Adjust PID
- BEC Output: 5V, 3A
- Size: 25 x 25mm board, 20mm mounting holes ( M2 )
- Weight: 2.5g
- Support Subs / PPM / DSMX Receiver
4-in-1 BLHeli-S 20A ESC:
- Input Voltage: 2-4S Lipo battery
- Constant Current: 20A
- Peak Current: 25A
- BEC Output: NO
- Firmware: BLheli_S 16.7
- Size: 27 x 27mm ( main board ); 27 x 31mm ( including pad )
- Installing Hole: 20 x 20mm, M2
- Weight: 4g
- CPU: SILABS EFM8BB2 48MHZ
- MOS Tube: top quality MOSFET
- Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Forward and Reverse
Transmitter:
- Output Power: 0mW / 25mW / 200mW switchable
- Control Mode: button
- BAT: 7 - 26V, BEC 5V - 1A
- 200mA - 200mW
- Video System: NTSC / PAL
- Antenna: welding antenna
- Frequency: 5.8GHz 5 bands 40 channels, with raceband: 5645 - 5945 MHZ
- Size: 25 x 25mm( L x W ), hole: 20 x 20mm
- Weight: 2.5g
RunCam Micro Sparrow Camera:
- Image Sensor: 1 / 3 inch CMOS
- Horizontal Resolution: 700TVL
- Lens: 2.1mm ( M8 ), 145-degree FOV
- Aspect Ratio: 16:9
- Integrated OSD: yes
- TV System: PAL / NTSC Switchable
- S/N Ratio: more than 50dB ( AGC off )
- Electronic Shutter Speed: PAL: 1/25 - 100,000s; NTSC: 1/30 - 100,000s
- Auto Gain Control ( AGC ): low / middle / high
- DNR: 2DNR
- Day / Night: EXT / COLOR / BW / AUTO GEN
- Power Supply: 5 - 36V
Motor:
GT1306 3100KV 2-4S
Receiver:
- KIT Version: without receiver
- PNP Version without receiver
- BNF Version: with FRSKY XM receiver
Helifar Turtles is an extraordinary micro FPV racing drone with 3mm thick 3K carbon fiber chassis. Compared with smaller multirotors, it is more powerful, due to the 1306 3100KV brushless motor and 3030 four-blade propeller. Therefore, you can enjoy flying it at a high speed outdoors. In comparison with bigger drones, it features higher maneuverability because of the light weight and small size. More importantly, with the RunCam Micro Sparrow camera, you are sure to be satisfied with the real-time FPV.
Note:
The color ( red, blue, black, yellow, purple, white ) of the propeller will be sent randomly
Specification:
- Brand Name: Helifar
- Model: turtle
- Wheelbase: 135mm
- Arm Plate Thickness: 3mm
- Bottom Plate Thickness: 3mm
- Side Plate Thickness: 1.5mm
- Material: carbon fiber
- Weight: 38g
- Drone Weight: 106gï¼battery not included ï¼
F3 Flight Controller:
- Micro F3 Flight Control Board ( D-Shot Version )
- MPU: MPU6000 - SPI
- CPU: STM32F303
- Buzzer: support
- LED Strip: support
- Input Voltage: 2-4S Lipo
- Built-in Betaflight OSD to Adjust PID
- BEC Output: 5V, 3A
- Size: 25 x 25mm board, 20mm mounting holes ( M2 )
- Weight: 2.5g
- Support Subs / PPM / DSMX Receiver
4-in-1 BLHeli-S 20A ESC:
- Input Voltage: 2-4S Lipo battery
- Constant Current: 20A
- Peak Current: 25A
- BEC Output: NO
- Firmware: BLheli_S 16.7
- Size: 27 x 27mm ( main board ); 27 x 31mm ( including pad )
- Installing Hole: 20 x 20mm, M2
- Weight: 4g
- CPU: SILABS EFM8BB2 48MHZ
- MOS Tube: top quality MOSFET
- Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Forward and Reverse
Transmitter:
- Output Power: 0mW / 25mW / 200mW switchable
- Control Mode: button
- BAT: 7 - 26V, BEC 5V - 1A
- 200mA - 200mW
- Video System: NTSC / PAL
- Antenna: welding antenna
- Frequency: 5.8GHz 5 bands 40 channels, with raceband: 5645 - 5945 MHZ
- Size: 25 x 25mm( L x W ), hole: 20 x 20mm
- Weight: 2.5g
RunCam Micro Sparrow Camera:
- Image Sensor: 1 / 3 inch CMOS
- Horizontal Resolution: 700TVL
- Lens: 2.1mm ( M8 ), 145-degree FOV
- Aspect Ratio: 16:9
- Integrated OSD: yes
- TV System: PAL / NTSC Switchable
- S/N Ratio: more than 50dB ( AGC off )
- Electronic Shutter Speed: PAL: 1/25 - 100,000s; NTSC: 1/30 - 100,000s
- Auto Gain Control ( AGC ): low / middle / high
- DNR: 2DNR
- Day / Night: EXT / COLOR / BW / AUTO GEN
- Power Supply: 5 - 36V
Motor:
GT1306 3100KV 2-4S
Receiver:
- KIT Version: without receiver
- PNP Version without receiver
- BNF Version: with FRSKY XM receiver
Specification
Specification |
Package weight: 0.1900 kg
Package size (L x W x H): 15.00 x 15.00 x 5.00 cm / 5.91 x 5.91 x 1.97 inches |
---|---|
Package Contents |
Package Contents: 1 x 135mm Turtle Drone, 8 x 3030 Propeller, 1 x XT30 Power Cable, 1 x Battery Strap |
Color and Style Disclaimer:
The item color and style(or pattern) is subject to stock availability, we reserve the right to substitute for another color/pattern.
The item color and style(or pattern) is subject to stock availability, we reserve the right to substitute for another color/pattern.