PRODUCT DESCRIPTION
NOTE:
If you use your own DJI Remote Controller, you MUST update your firmware betaflight_4.1.0_STM32F7X2 configurator betaflight to 10.6.0 to set up and bind your DJI remote controller.
- Model 1 setup: Reveiver tap -----> Choose “Spektrum / Graupner / JR (TAER1234)”
- Model 2 setup: Reveiver tap -----> Choose “Frsky / Futaba / Hitec (AETR1234)”
DOWNLOADS:
The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In addition, we add the popular and reliable USB Type-C instead of Micro USB which makes the connection easily.
Features:
• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires.)
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• Designed to support DJI Digital FPV.
SucceX-D F7 TwinG SPECS:
-MCU: 216MHz STM32F722
-Gyro: TwinG ICM20689
-Blackbox: 32MB
-Betaflight OSD: YES
-BEC: 5V 2.5A
-9V 2.5A 18W Design for DJI FPV Air Unit
-Uarts: 5
-ESC Telemetry: UART5
-INA Pad:nuart2
-Input voltage: 2-6S,MAX 8S
-Firmware:betaflight_4.0.5_STM32F7X2.hex
-CLI dump file: IFLIGHTF7_TWIN_G.config
Size:27*27mm /20*20mm φ3 mounting
Physical:
- Mounting hole: 20*20mm, φ4mm with Grommets φ3mm
-Size: 31*31mm
SucceX Mini 40A ESC SPECS:
- MCU: STM32F051K66
- Current Sensor: Yes
- Input: 2-6S lipo
- Telemetry: Yes
- Installing Hole: 20x20mm, M3
- Target: iFlight-BL32-4IN1
- BLHeliSuite download :http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file
- Constant: 40Amps
- Burst: 45Amps
- Weight:16.7g
- Dimensions: 31*31mm(including the power pads)
- Mounting Holes: 20*20mm,M3
- Supports Dshot1200,Proshot,Oneshot,Multishot
Package included:
-SucceX-D Mini F7 TwinG FC x 1
-SucceX 40A BLHeli_32 4-in-1 ESC x 1
-DJI compatible harness cable x 1
-Stack mounting screws and dumpers and nuts,cable
NOTE:The stack is not included DJI Air Unit
