Descriptions:
Hawk280mm uses an all-in-one flight control system, compatible with the mainstream transmitters for example JR, Futaba.
Specifically chosen to run 2205 2300KV motors with 6 inch propellers, to reach exciting new speeds. Due to the use of extremely lightweight pure carbon fibre material and the all-in-one flight control system, allows for the flight weight to be as light as 360g without battery.
This means you will be able to accelerate quick off the mark, remarkably responsive and stable flight. The frame is of the X4 model, the diameter between the motors is 280mm. The thickness of the fuselage is only a meer 1.5mm, pure carbon fibre supports for lightweight but a strong structure. The arms all have a thickness of 3mm, also made from carton fibre.
Newly researched all-in-one flight control system includes the following functions:
4 x 20A speed controller ( Bleheli oneshot settings installed)
Adjustable 32 channel 5.8G-600WM video transmitter
OpenPilot CC3D flight controller
Adjustable LED power output
Adjustable on / off echolocation device
5V or 12V FPV camera power and video output
Input power built in XT-60 socket
The all-in-one flight control system reduces the need for complicated soldering hence trimming down the weight of the wires resulting in extraordinary performance.
Components required for normal flight:
3 - 4S 1400-2300mAh LiPo Batteries ( flight time 5 - 9minutes )
At least 5 channels or above transmitter with mini receiver
Components requred for FPV flight:
At least 5 channels or above transmitter with mini receiver
21 x 21mm camera with 5V or 12V input
5.8G video output device with receiving capacity.
Hawk280mm uses an all-in-one flight control system, compatible with the mainstream transmitters for example JR, Futaba.
Specifically chosen to run 2205 2300KV motors with 6 inch propellers, to reach exciting new speeds. Due to the use of extremely lightweight pure carbon fibre material and the all-in-one flight control system, allows for the flight weight to be as light as 360g without battery.
This means you will be able to accelerate quick off the mark, remarkably responsive and stable flight. The frame is of the X4 model, the diameter between the motors is 280mm. The thickness of the fuselage is only a meer 1.5mm, pure carbon fibre supports for lightweight but a strong structure. The arms all have a thickness of 3mm, also made from carton fibre.
Newly researched all-in-one flight control system includes the following functions:
4 x 20A speed controller ( Bleheli oneshot settings installed)
Adjustable 32 channel 5.8G-600WM video transmitter
OpenPilot CC3D flight controller
Adjustable LED power output
Adjustable on / off echolocation device
5V or 12V FPV camera power and video output
Input power built in XT-60 socket
The all-in-one flight control system reduces the need for complicated soldering hence trimming down the weight of the wires resulting in extraordinary performance.
Components required for normal flight:
3 - 4S 1400-2300mAh LiPo Batteries ( flight time 5 - 9minutes )
At least 5 channels or above transmitter with mini receiver
Components requred for FPV flight:
At least 5 channels or above transmitter with mini receiver
21 x 21mm camera with 5V or 12V input
5.8G video output device with receiving capacity.
Specification
General |
Type: 2-blade Propeller,Antenna,Back Arm,Body Shell,Brushless,Camera,ESC,Flight Controller,Front Arm,Gyro,LED Light,Main Board,Multirotor Frame Set,Power Board,Upper Body Shell
Version: BNF |
|---|---|
Motor |
Model: 6045
Motor Type: Brushless Motor KV: 2300KV Shaft Diameter: 6inch CW / CCW: CCW,CW |
Flight Controller |
Flight Controller Type: F1 |
Remote Controller Specifications |
Remote Control: 2.4GHz Wireless Remote Control |
Camera |
Camera Pixels: 700TVL CMOS |
Electronic Speed Controller |
Firmware: BLHeli
Functions: Oneshot125,Oneshot42 Continuous Current: 20A Burst Current: 4 x 30A Input Voltage: 2 - 4S |
Propeller |
Material: PC |
Dimension and Weight |
Package weight: 0.9500 kg
Package size (L x W x H): 37.00 x 16.00 x 28.00 cm / 14.57 x 6.3 x 11.02 inches |
Package Contents |
Package Contents: 1 Ã 280mm Racing Quadcopter, 1 Ã CC3D Flight Controller, 4 Ã 2205 2300KV brushless Motors, 4 Ã Oneshot125 BLHeli_S / Simonk 20A ESCs 4 Ã 6 |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
![DJI Neo - 10 Reasons Buy or [ Not Buy ]. - UCwojJxGQ0SNeVV09mKlnonA](https://i4.ytimg.com/vi/lG4mCfL_Rlw/hqdefault.jpg)
