Usage:
At present, most of the engine propellers on the market are not drilled.
The drilling die sleeve is on the propeller to be drilled.
It is very convenient to drill the screw holes matching the engine completely with the electric drill.
It contains two specifications of drill bits needed for drilling. It is convenient to use.
The drilling die sleeve is on the propeller to be drilled.
It is very convenient to drill the screw holes matching the engine completely with the electric drill.
It contains two specifications of drill bits needed for drilling. It is convenient to use.
Small size:
Axis Diameter of Center Axis: 10MM Hole: M6
Two kinds of hole spacing: 26mm hole spacing M4 hole or 30mm hole spacing M5 hole
When drilling holes larger than 5MM, the 4.8mm screw holes are drilled with the drilling die first,
and then the 5 mm bit is used to ream the holes or larger.
and then the 5 mm bit is used to ream the holes or larger.
Support engine type:
DLE30/35RA/40/55/55RA/60/61 or DA50
Big size:
Axis Diameter of Center Axis: 10MM Hole: M6
Two kinds of hole spacing: 29mm hole spacing M5 hole or 34mm hole spacing M5 hole
Support engine type:
DLE85/110/120 or DLE170/220 or DA70-150 or 3W/50-150
Note: When drilling holes larger than 5MM, such as DLE170/DLE220, thread drills 5 mm screw holes with drilling die,
and then reams holes to 6 mm or larger with 6 mm drill bit.
and then reams holes to 6 mm or larger with 6 mm drill bit.
Package included:
Small size:
1 x Drill body
1 x M4 bit
1 x M5 bit
1 x M4.8 bit
30 x M5
1 x inner six-screw M5 gasket
or
Big size:
1 x Drilling tool body
1 x M4.8 bit
1 x M5 bit
30 x M5
1 x inner six-screw M5 gasket
