Features:
Compatible with all the DSMX / DSM2 standard transmitter
Compatible with AR6210, CM921, CM821, AR12120, AR9020 as receiver satellite
Support the default type all channel protection function
Wireless simulator interface( W.D.S.C ), support REFLEXTR, G3, G4, G5 fly simulatorÂ
D.S.C function has cancelled for more stable version
Brand Name: REDCON
Item Name: CM921SÂ receiver satellite
Band: 2.4G
Channel: 4CH
Material: Plastic
Modulation: DSM2 / DSMX
Dimension:Â 30 x 22 x 6mm
Binding Procedure:
Step 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and satellite LED's should illuminate.
Step 2. To set fail-safe throttle and control surface positions, ( minimum throttle with and all control surfaces set to neutral is suggested ). Press the bind button ( LED will illuminate ). Turn on the transmitter.Â
Step 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now.
Step 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it's power off and back on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter off. Surfaces and throttle should return to your preset fail-safe positions set in.
General Notes:
Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed.Â
Compatible with all the DSMX / DSM2 standard transmitter
Compatible with AR6210, CM921, CM821, AR12120, AR9020 as receiver satellite
Support the default type all channel protection function
Wireless simulator interface( W.D.S.C ), support REFLEXTR, G3, G4, G5 fly simulatorÂ
D.S.C function has cancelled for more stable version
Brand Name: REDCON
Item Name: CM921SÂ receiver satellite
Band: 2.4G
Channel: 4CH
Material: Plastic
Modulation: DSM2 / DSMX
Dimension:Â 30 x 22 x 6mm
Binding Procedure:
Step 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and satellite LED's should illuminate.
Step 2. To set fail-safe throttle and control surface positions, ( minimum throttle with and all control surfaces set to neutral is suggested ). Press the bind button ( LED will illuminate ). Turn on the transmitter.Â
Step 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now.
Step 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it's power off and back on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter off. Surfaces and throttle should return to your preset fail-safe positions set in.
General Notes:
Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed.Â
Specification
General |
Type: Transmitter,Receiver,Receiver Board |
|---|---|
Dimension and Weight |
Product weight: 0.010 kg
Package weight: 0.150 kg Product size (L x W x H): 3.00 x 2.20 x 0.60 cm / 1.18 x 0.87 x 0.24 inches Package size (L x W x H): 10.00 x 5.00 x 3.00 cm / 3.94 x 1.97 x 1.18 inches |
Package Contents |
Package Contents: 1 x REDCON CM921SÂ Receiver Satellite |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
