Specification:
Brand Name: SPCMaker
Model: Bat78-S
Item Name: 78mm F4 2S Whoop FPV Racing Drone
Version: RTF
Wheelbase: 78mm
Product Size: 107x95x35mm
Weight: 53g (without battery)
Packing: portable storage handbag
Packing Size: 215x220x125mm
| F4 OSD Flight Controller AIO 20A ESC Board | CPU: STM32F411CEU6 (100MHZ) IMU: MPU6000 (SPI) OSD: AT7456E LED: Support WS2812 and other programmable Sensor: Built-in current sensor (current coefficient Amp Meter Scale: 300) Firmware: Betaflight 4.1.2 Flight control model: MTKS/MATEKF411 (STM32F411) Receiver support: Frsky/Futaba/Flysky/TBS Crossfire/DSMX|DSM2 receiver Size: 31.4x31.4mm (25.5mm mounting hole) Weight: 6.83g |
| Onboard 20A BLHeli_S 4in1 ESC | Firmware support: BLHELI_S/JESC Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input voltage: 2S-4S Lipo Continuous current: 20A Peak current: 40A Firmware version: BLHELI_S (Q_H_20) Motor connector: 1.25mm 3P straight pin socket |
| 1103 11000KV Brushless Motor | Model: 1103 11000KV Height: 8.5mm Shaft: Ï1.5mm Motor mounting hole: hole pitch 9mm screw hole M2 KV: 11000KV Input Voltage: 2-3S lithium battery Cable length: 40mm Weight: 3.3g |
| Gemfan 1636 40mm 4-Blade Propeller | Brand: Gemfan Name: 1636 40mm 1.5mm propeller Number of blades: 4 blades Pitch: 3.5 inches Material: PC Weight: 0.61g Inner diameter of center hole: 1.5mm Paddle diameter: 40.8mm Center thickness: 5.2mm Maximum width: 7.46 mm |
| 5.8G 40CH 25-400mW VTX | Brand: SPCMAKER Model: NANO VTX V1.0 Video format: NTSC / PAL Power: 25/100/200/400mW Control mode: Betaflight OSD control (RX)/button Input voltage: 5V Size: 14 x15mm Pitch: 18 mm Antenna: IPEX Weight: 2g |
| Runcam Nano 2 700TVL Camera | Brand Name: Runcam Model: Nano 2 Image sensor: 1/3" CMOS Horizontal resolution: 700TVL Lens: 2.1mm (M8) field of view 155° 1.8mm (M8) field of view 170° Signal system: NTSC / PAL D-WDR: Automatic Day/night: color Power supply: DC 3-5.5V Current: 110mA @ 5V [email protected] Net weight: 3.2g Size: 14x 14x 16mm (LxWxH) |
| Radio Tranmitter & Receiver | Brand Name: RadioLink Product name: T8S transmitter with R8SM receiver Weight: 142g Colour: Black Size: 162.5x 95.5x57 mm (transmitter) Working voltage: 4.2V Working current: <150 (±5) mA Support R8EF, R8FM, R7FG, R7F, R6FG, R6F receiver Product name: R8SM receiver Model: R8SM Size: 18 * 13 MM Weight: 2g Number of channels: 8 channels Signal output: SBUS / PPM Working voltage: 4.8-6V Working current: 30mA (input voltage: 5V) Compatible T8S / T8FB / RC6GS / RC4GS receiver |
| 2S 7.6V 450mAh 80C Lipo Battery | Model: High Energy 7.6V 450Mah 80C Capacity: 450mAh Quantity: 2 PCS Size: 14x18x 62mm Plug: XT30 plug Continuous discharge rate: 80C Weight: about 28g |
| Hawkeye Display Screen | Model: Hawkeye 3.5-inch xitu version Display resolution: 960x240 Backlight: LED Size: 3.5 inches Brightness: 350Lux Aspect ratio: 16:9 Response time: <10ms Color system: PAL / NTSC Battery life: about 2.5 hours Signal: Video (PAL/NTSC/Auto) Display size: 66Ã57Ã14mm Gross weight: 110g 5.8G sensitivity: -94dB |
| SKYRC E3AC Charger | Model: SKYRC E3AC charger AC input: 100-240VC, 50-60Hz Battery type: LiPo Number of batteries: 2-3S Charging current: 1.2A maximum Battery termination voltage: 4.2V±0.02V Circuit power: 11W±10% Size: 88x57x35mm Weight: 103g |
Pacakage Included:
1x Bat78 Whoop Drone
8x GEMFAN 1636 40MM 4CW+4CCW propeller
1x T8S+R8SM Remote Control
1x Hawkeye 3.5-inch xitu version
1x E3AC (2-3S) charger
2x 2s 450mAh 80c lithium battery
1x USB tuning parameter connection data cable
1x Storage handbag
