Features:
1. The steering gear has slow start function: it is difficult to see with naked eyes that the current of the steering gear is relatively large at the moment of starting or reversing, so the service life of the steering gear is relatively long with this function;
2. Load blocking protection function: when the steering gear is continuously blocked or the angle of load blocking is greater than 3 degrees, the duration is 10 seconds and the current is maintained at 2.5 A or more, the steering gear starts protection. At this time, the locking force is reduced by half. After the load blocking is removed, the steering gear will return to normal when the remote control rotates at will.
3. Voltage and current: the steering gear support voltage is between 4.8v-8.4v, and the BEC is at least 2A or above;
4. Angle range: the default of the remote control is 90 degrees, the maximum is 120 degrees; support the control board 0.5-2.5ms, the angle is 180 degrees;
5. Scope of application: remote control vehicle, climbing vehicle; single chip microcomputer control robot, manipulator, etc;
Upgrade note: this model is currently upgraded to stainless steel gear
Specification:
Brand:SPT Servo
Potentiometer: Mechanics
Motor:Brushless
Voltage Range:4.8V/6.0V/8.4V
Neutral Point:1500μs
Signal Frequency:330Hz
PWM Voltage:3.3V-5.0V
PWM Voltage:3.3V-5.0V
Feedback Angle:No
Operating Temperature:-10°C-50°C
Cycle:20ms
Dead band:2μs
Default Direction:CCW
Yes / no Lock:Lock
Remote control Angle:90°
500-2500μs Angle:180° / PWM
Quiescent Current:10mAh
Rated Current:1.5A
Blocking Current:2.5A
Weight / Dimensions:67g / 40.5*20*37.5mm
Gear Material:All Metal Gear
Shell Material:Half Aluminum Shell
Bearing:2BB
Connector Wire Length:260MM
line Definition:Brown-/Red+/Orange s
Operating Speed:6.0V/ 0.11"/60°
8.4V/ 0.08"/60*
Stall Torque:6.0V/ 25kg.cm
8.4V/ 35kg.cm
