SQ EAI01 Electric Soldering Iron Mini Smart Portable 65W Soldering Iron For RC Vehicles Model FPV Drone Soldering - 58.00 €

SQ EAI01 Electric Soldering Iron Mini Smart Portable 65W Soldering Iron For RC Vehicles Model FPV Drone Soldering

Power output：65W

Temperature range: 100-400 °C / 212-752°F

Factory default temperature: 300 °C / 572°F

Power supply: DC 12-24V 5.5 * 2.5mm standard interface

Technical Parameter

Preset temperature 300℃(Initial setup)

Power saving temperature 200℃(Initial setup)

Operating voltage Power The fastest time to heat up

(from30℃-300℃)

12V 17W 40s

16V 30W 20s

19V 40W 15s

24V 65W 11s

Lightweight design, easy to install and use, easy to remove and store, comfortable control handle, high-efficiency heating end, simple control interface. It is a favorite tool for electronic engineers and electronic maintenance enthusiasts.

It can work in DC 12-24V. OLED screen display, key temperature adjustment, external independent power supply. In DC 19V 40W state, 15 seconds temperature rise to 300 ℃.

Controller:

EAI01 is based on 304 stainless steel nested ABS + PC shell, Integrated special power interface, Safety circuit design, Antistatic structure.

The perfect combination of embedded STM32 processor, dual temperature sensor and acceleration transmitter.

Make EAI01realize intelligent temperature control between 100-400 degrees, more stable temperature, instantaneous temperature rise, automatic sleep, over temperature alarm and other functions.

Heating end:

The heating end adopts internal heating core

Factory preset temperature: 300 ℃

Temperature stability range: ± 2%

External independent power supply: DC 5525 power interface, suitable for DC 12-24v notebook power supply, vehicle power supply and mobile power supply.

Micro USB interface: set temperature rise curve, user defined function key and firmware upgrade function through parameter file.

Additional functions: application layer open source design. You can change the internal parameter settings according to your own needs to meet more and more performance needs of different customers.

Safety Instructions

1. Please use ground clamp, proper power supply and other accessories to ensure safe use.

2. WhenEAI01is used for the first time, it may slightly smoke due to

heating of electric heating element, which is normal Phenomenon.

3. If EAI01 is used continuously for more than 350 ° C for 40 minutes,

the handle temperature of soldering iron will reach 50°C~60°C.

4. When EAI01 temperature rises, do not contact the iron head to avoid

scalding.

5. When EAI01is powered on, the iron head cannot be replaced.

Packageincluded:

1 x EAI01 Controller

1 x Solder Tip( Default K tip）

1 x Safety Instructions

1 x Hex Key

1 x User Manual

1 x DC5525 Power Cable

1 x Mini-bakelite Stand Holder