Motor parameters:
Product Name: 42 two-phase stepper motor
Material:Metal
Color:As the picture shown
Product Size:Length is 75mm,max diameter is 55mm
Package Box Size:135*80*90mm
Product Weight:About 267.4g
Packaging Weight:Approx.334g
Model number :17HS4401
Step angle : 1.8 °
Max no-load starting frequency : ⥠1400 PPS
Rated voltage 3.6V
Max no-load operating frequency : ⥠4000 PPS
Rated current : 1.5A / phase
Phase inductance :3.7 Ã (1 + 20%) mH
Holding torque : â¥420 mN.m
Phase resistance : 2.4 à (1 + 15%) Ω / phase
Positioning torque : 15 mN.m REF
Electric strength : AC600V / 1mA / 1S
Wiring Instructions:
1. VCC : Connect 12-30V power supply ( Refer to the working voltage of the motor, general 24V )
2. GND: Ground wire
3. CLK : Control signal (Connected to pulse input )
4. DIR: Direction control signal ( Floating forward, ground reverse )
5. ENA: Connect to enable signal ( Default enable, grounding stops working )
6. P2: Connect one phase to the motor on each side ( Refer to the motor parameter description, the motor is divided into two phases AB, pins 1 and 2 are connected to one phase, and pins 3 and 4 are connected to the other phase. )
DIP switch {ON (1) / OFF (0)}:
1.Div1, Div2 control pulse frequency division
(1) 00: 4 subdivision
(2) 10: 8 subdivision
(3) 01:16 subdivision
(4) 11:32 subdivision
2.Ctl setting control mode, open-loop / closed-loop
(1) 0 : Open-loop mode
(2) 1 : Closed-loop mode
3.AC setting calibration
Turn the AC to position 1, and turn on the power. The LED blinks 3 times to start automatic calibration. The motor shaft rotates counterclockwise for one cycle and then clockwise for one cycle. The system automatic calibration complete and the LED continues to flash. The AC dial returns to position 0, and then restart power.
Application examples:
1.3D printing with fine closed-loop positioning
2.Optical aiming (Laser, telescope, camera gimbal, etc.)
3.Speed loop record player
4.Force feedback / impedance control robot
5.Force feedback of game controller
6.Adjustable mechanical impedance: virtual spring, damper, etc.
7. Electric transmission device between two axes such as CNC machine tools
8.Gravity elimination (eg: offset gravity torque on the robot arm, etc.)
9. Load detection and feature description (Used as a balance, etc.)
10. Paper towel / TP distributor
11.Variable load (Brake, generator, etc.)
12.Valve control (Automated garden hose, etc.)
Package included :
1 x Motor Drive Board
1 x Motor
1 x Motor Line
1 x Dedicated Radial Magnet
1 x Dedicated Srew Bag
1 x Instruction Manual
null
