Specification:
Brand Name: URUAV
Model: UR4 Lipo Killer
Item Name: 0/ 3/ 3.2/ 3.4/ 3.6/ 3.8/ 4V Battery Discharger for 1-6S Lipo Battery
Battery Type: Compatible with Lipo Battery & LIFE Battery
Dischager Range: 0/ 3/ 3.2/ 3.4/ 3.6/ 3.8/ 4V
Dischager Current: 4.0V-30.V 100mA
Dischager Time: 75min @ 0.1V ( Example as 1300mAh Lipo Battery)
Connector: 4.0V-3.0V Dischager Connector ( Must Plug in Balance Head or Pins )
0V Dischager Connector ( Must Plug in XT60 Connector)
Notice: MUST Plug right connector to counterpart discharger connector.
Dimension: 65x33x10mm
Weight: 18.8g
Usage Instruction:
0V Discharger
- Plug your battery's XT60 Connector in the yellow connector ( on the right side of board)
- Then 0V LED will keep lighting untill finishing dischager
- 0V LED Light goes off, which points at battery dischager to 0V.
- Discharging to 0V need 24 hours above
4.0V-3.0V Discharger
- Plug your battery's balance pin head in the Pin connector ( On the left side of boaed )
Notice: The battery's black cable points at " G" ( The word showed on the board)
DONT plug in opposite side.
- Then this lipo killer will test how many cells of your battery and counterpart LED will light on.
1S-6S Discharge LED will keep light. ( The lighting LED Number depends on your battery's Cell)
- Press " Set " button to set the voltage you want to discharge. ( 3/ 3.2/ 3.4/ 3.6/ 3.8/ 4V Optional)
Notice: The voltage you set must lower than your battery's present voltage
- 1S-6S Discharge LED goes off while finishing discharging
- Discharging from 4.2V to 3.8V need about 5 hours ( take example as 1300mAh Lipo Battery)
Package Included:
1x URUAV UR4 Lipo Killer Battery Discharger
