65.99 for Eachine US65 DE65 PRO 65mm 1-2S Brushless Whoop FPV Racing Drone BNF CrazybeeX F4 FC CADDX ANT Cam 0802 14000KV Motor - discount coupon
8.31
Note: The first 200pcs whoop will ship with GNB27 2.0 plug. It will be exchanged to ET2.0 plug after sending the first 200pcs.
Eachine US65 DE65 PRO 65mm 1-2S Brushless Whoop FPV Racing Drone BNF CrazybeeX F4 FC CADDX ANT Cam 0802 14000KV Motor
Eachine US65 / DE65 PRO whoop comes with watertransfer craft and a New AIO 4 IN 1 CrazybeeX flight controller. The weight only 24g. High performance 2.0 plug design supporting up to 2S Lipo and 5A continuous current for each ESC. Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera give you a highly view. Simply bind it to your transmitter then you are ready to enjoy your all-new Eachine US65 / DE65 PRO.
Specificationsï¼
Brand Name: Eachine
Item Name: US65PRO DE65PRO
Wheelbase: 65mm
Size: 81mmx81mmx39mm
Weight: 24g(without battery)
Features:
24gram 1-2s brushless 65mm whoop
New AIO 4in1 CrazybeeX flight controller
Smooth and powerful
CADDX ANT Camera
High performance ET2.0 plug
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
External Frsky RXSR receiver version(ACCST D16 sbus output)
External TBS Crossfire Nano receiver version
Flight controller | (Frsky SPI RX version) CRAZYBEEX FR V1.0 FC Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEEX FS V1.0 FC Firmware target: CrazybeeF4FS (External Frsky RXSR version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX (External TBS CRSF NANO version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX | |
Motor | Mode: NX0802 14000KV | |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) | |
Propellers | Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm | |
Onboard 5.8g VTX | Output power: 25mw Smartaudio ready | |
Caddx ANT 1200tvl camera | Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: [email protected] Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20â~+60â Weight: 2g (N.W.) | |
Lipo Battery | Capacity:250mAh Connector: ET2.0 | |
Multi port Lipo/Lihv battery charger | Weight: 41g | |
Onboard Frsky SPI receiver Version | Onboard Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatible Channels: 8ch Onboard Flysky SPI receiver Version SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable | |
| External Frsky R-XSR receiver version | Weight: 1.5g Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel) Operating Voltage Range: 3.5V~10V Operating Current:70mA@5V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCESS Protocol ( Upgrade firmware) | |
External TBS CRSF Nano receiver version | Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible | |
Package Included:
1 x US65 PRO or DE65 PRO Whoop Frame and canopy
1 x Receiver
Option1: CrazybeeX FR V1.0 built-in internal Frsky SPI D8/D16 receiver
Option2: CrazybeeX FS V1.0 built-in internal Flysky SPI receiver
Option3:CrazybeeX PNP V1.0 with External Frsky RXSR receiver
Option4:CrazybeeX PNP V1.0 with External TBS crossfire nano receiver
4 x Eachine NX0802 KV14000 brushless motor
1 x Gemfan 1219-3 Propellers(4cw+4ccw)
1 x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
1 x 5.8G 25mw 40ch vtx (Flight controller built-in)
4 x 1S 250mah 30C LiHV Battery
1 x Multi port LIPO/LIHV Battery Charger with 12V adapter
1 x Screw Driver
1 x Propeller disassemble tool
1 x Eachine Handbag
