Coupons
8.31
AGFRC MRF16CH 2.4G D16 Mini Receiver Compatible SBUS CPPM RSSI Output for Mini RC Drone FPV Racing - discount coupon
8.31
14.13 20.19
AGFRC MRF16CH 2.4G D16 Mini Receiver Compatible SBUS CPPM RSSI Output for Mini RC Drone FPV Racing
BGMRF14 Check Code
AGFRC MRF16CH 2.4G D16 Mini Receiver Compatible SBUS CPPM RSSI Output for Mini RC Drone FPV Racing
Specification:
Brand name: AGFRC
Item name: MRF16CH receiver
Operating Voltage: 4.8V~8.4V
Dimension: 26x19.2x5mm (exclude antenna)
Weight: 3.8g
Antenna: Dual-antenna
Communication Data: Bidirection Communication
Output Channels: S-BUS (16CH) + CPPMR (8CH) + RSSI (PWM)
Compatibility:
Compatible OPEN TX FRSKY D16 remote control system
Suitable for FRSKY X9D, X9DP, X9E, X12S etc. D16 supported remote control
Feature:
1) High quality PA to ensure high receiving sensitivity;
2) Dual-antenna design, available to mount in different angle to increase the reception reliability;
3) Dual serial signal S-BUS/PPM (8CH) output, connect directly to flight control system, especially for mini multirotor and aircraft to save mounting space;
4) RSSI(PWM) output, available to detect the signal changes of the radio control via receiver.
Bind Procedure:
1. Turn on transmitter, select MENU and enter MODEL SETUP, select D16 mode and start BIND function;
2. Press and hold the SW on the receiver and power on, the GREEN LED on and RED change to flash means bind completely.
3. Transmitter exit BIND function, power-on again the receiver, GREEN LED on means BING successfully;
4. If failed binding, please repeat above steps.
LED Status:
Package included:
1x MRF16CH receiver
Specification:
Brand name: AGFRC
Item name: MRF16CH receiver
Operating Voltage: 4.8V~8.4V
Dimension: 26x19.2x5mm (exclude antenna)
Weight: 3.8g
Antenna: Dual-antenna
Communication Data: Bidirection Communication
Output Channels: S-BUS (16CH) + CPPMR (8CH) + RSSI (PWM)
Compatibility:
Compatible OPEN TX FRSKY D16 remote control system
Suitable for FRSKY X9D, X9DP, X9E, X12S etc. D16 supported remote control
Feature:
1) High quality PA to ensure high receiving sensitivity;
2) Dual-antenna design, available to mount in different angle to increase the reception reliability;
3) Dual serial signal S-BUS/PPM (8CH) output, connect directly to flight control system, especially for mini multirotor and aircraft to save mounting space;
4) RSSI(PWM) output, available to detect the signal changes of the radio control via receiver.
Bind Procedure:
1. Turn on transmitter, select MENU and enter MODEL SETUP, select D16 mode and start BIND function;
2. Press and hold the SW on the receiver and power on, the GREEN LED on and RED change to flash means bind completely.
3. Transmitter exit BIND function, power-on again the receiver, GREEN LED on means BING successfully;
4. If failed binding, please repeat above steps.
LED Status:
| GREEN LED | RED LED | Status |
| Off | Blink | No signal reception |
| Solid | Fast flash | Complete bind |
| Solid | Off | Receiving signals |
Package included:
1x MRF16CH receiver
BGMRF14 Check Code
