Main Features:
Demonstrated range of several kilometers with a small antenna
Can be used with a bi-directional amplifier for even more range
MAVLink protocol framing and status reporting
Frequency hopping spread spectrum ( FHSS )
Adaptive time division multiplexing ( TDM )
Support for LBT and AFA
Built in error correcting code ( can correct up to 25 percent data bit error )
Open source firmware
AT commands for radio configuration
RT commands for remote radio configuration
Adaptive flow control when used with APM
Based on the HopeRF HM-TRP radio module, featuring an SiLabs Si1000 RF micro-controller
The 3DR radio telemetry system is designed as an open source Xbee replacement radio set
Specifications:
433MHz frequency band
Receiver sensitivity to -117 dBm
Transmit power up to 20 dBm ( 100mW )
Transparent serial link
Air data rates up to 250kbps
Antenna size: 106 x 9 x 9 mm
Cable length: 150 mm
Air module size: 47 x 19 x 6 mm
Ground module size: 72 x 17 x 6 mm
Note: The quadcopter in the picture is not included. The telemetry module set is especially designed for Europe users
Demonstrated range of several kilometers with a small antenna
Can be used with a bi-directional amplifier for even more range
MAVLink protocol framing and status reporting
Frequency hopping spread spectrum ( FHSS )
Adaptive time division multiplexing ( TDM )
Support for LBT and AFA
Built in error correcting code ( can correct up to 25 percent data bit error )
Open source firmware
AT commands for radio configuration
RT commands for remote radio configuration
Adaptive flow control when used with APM
Based on the HopeRF HM-TRP radio module, featuring an SiLabs Si1000 RF micro-controller
The 3DR radio telemetry system is designed as an open source Xbee replacement radio set
Specifications:
433MHz frequency band
Receiver sensitivity to -117 dBm
Transmit power up to 20 dBm ( 100mW )
Transparent serial link
Air data rates up to 250kbps
Antenna size: 106 x 9 x 9 mm
Cable length: 150 mm
Air module size: 47 x 19 x 6 mm
Ground module size: 72 x 17 x 6 mm
Note: The quadcopter in the picture is not included. The telemetry module set is especially designed for Europe users
Specification
Custom |
Type: Radio Telemetry Kit
Application: For APM, APM2, APM2.6, APM 2.8 Flight Controller |
---|---|
Dimension and Weight |
Product weight: 0.0800 kg
Package weight: 0.0820 kg Package size (L x W x H): 17.00 x 8.00 x 12.00 cm / 6.69 x 3.15 x 4.72 inches |
Package Contents |
Package Contents: 1 x Radio Telemetry Ground Module, 1 x Telemetry Transceiver, 1 x Cable, 2 x Antenna |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Disclaimer:
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.
Note:
Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.
Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.