JJA-CM1200 1/3 CMOS 1200TVL Camera 2.1mm Lens PAL/NTSC Black/Red For RC Drone
Description (without OSD function)
Model | JJA-CM1200 FPV cameras |
Image Sensor | 1/3CMOS SUPER HAD II |
Horizotal Resoulution | 1200TVL |
Lens | 2.1mm |
Signal System | PAL/NTSC |
S/N Ratio |
|
Electronic Shutter Speed | PAL: 1/50-100.000, NTSC:1/60-100,000 |
Auto Gain Control(AGC) | YES |
Back light compensation(BLC) | YES |
Min lllumination | 0.01Lux/1.2F |
WDR | D-WDR |
DNR | 2DNR |
Day/Night | Auto/Color/B*W |
Power | DC 4.7-15V |
Net weight | 16g |
Dimensions | 25mm*25mm |
Package Included
1 x 1200tvl Camera
1 x Bracket
1 x Screw Pack
1 x AV Cable(JST-ZH 1.5mm 3P to TJC8 2.54mm )
AKK FX2-Dominator 250mW/500mW/1000mW/2000mW Switched Smart Audio 5.8Ghz 40CH FPV Transmitter Raceband Sender With MIC
Key features
Support Smart audio 250mW/500mW/1000mW/2000mW power switchable
One button frequency and power setup OSD configuration using smart audio 7-26V input with 5V output With MIC
Package Included
1 x AKK FX2-Dominator 250mW/500mW/1000mW/2000mW Switched Smart Audio 5.8Ghz 40CH FPV Transmitter Raceband Sender With MIC
1 x Antenna Extend Wire RP-SMA
1 x AV Cable (JST-GH 6P to JST-SH 4P/JST 2P)
Recommanded Parts:
Receiver for Smartphone : 5.8Ghz 150CH Click Here
FPV Monitor : 5.8Ghz 40CH Monitor Click Here
FPV Goggles : 5.8Ghz 40CH Goggles Click Here
Notice : If you don't have any soldering tool or experience, there is a simple way for connection, that you can strip off wires' coating and twine them by tape.