Noteï¼
(Package doesn't include for gopro7, the gopro7 on the pictures for reference only.)
Upgraded Feature:
x220 V1 | x220 V2 | |
Flight Controller | F3 6DOF | F405DJI DUAL BEC |
Motor | 2205 2300KV | 2207 2550KV |
ESC | 20A Blheli_S ESC ï¼Single ESCï¼ | 30ABlheli_S ESC ï¼Single ESC Easy Replacementï¼ |
Camera | 700TVL Cmos NTSC | FOXEER 600TVL PAL CCD (976 (H) x494 (V) Pixel) 1/3 inch SUPER HAD II CCD + Nextchip 2040 DSP |
VTX | 200mW VTX | 600mw VTX SmartAudio |
Camera Mount | for Rumcam | 3D Printed Mount for Gopro5/6/7 |
Frame Kit | 4mm Arm with Side Plate | 5mm Arm Without Side Plate Quick release Arm (1 screw) and Upper Plate(3 screws) |
TPU 3D Printed Part | NO | YES (Include Motor Protection Part, Safely Landing) (Include 3 IN 1 Antenna Mount, for VTX / 2.4G Recevier/ 915 Antenna) |
Battery | Normal Battery | Professtional Top Grade Battery for Racing Drone |
Description:
Brand: Eachine
Item Name: WizardX220 V2 5 Inch 4S FPV Racing Drone PNP
Drone Weight: 407g (with Camera Mount)
Frame Kit | Wheelbase: 225MM Floor thickness: 2.0MM Upper board thickness: 2.0MM X board thickness: 2.0MM The thickness of the side panel of the camera: 1.5MM Arm thickness: 5.0MM Frame material: T300 carbon fiber |
Motor | Motor KV: 2550RPM/V No-load current (Io/10V): 1.35A Adipocytes: 3-5S Weight: 31 grams Maximum continuous current: 35A Maximum continuous power: 560W Maximum thrust: 1180g (4S/5") Configuration: 12N/14P Motor resistance RM: 0.0536Ω Stator diameter: 22mm Stator thickness: 7mm Motor diameter: 27.7mm Length of motor body: 19.2mm Total shaft length: 34.2mm Drive shaft: M5 Bolt hole spacing: 16mm Bolt thread: M3 Propeller: 5-6 inches |
PDB-XT60 | Mount holes:30.5x30.5mm BEC:NO |
F405 DJIDUAL BEC V1 Flight Controller | CPU: STM32F405RGT6 Six axis: MPU6000 Size: 37mm x 37mm Balck box ï¼16M Firmware version: EachineF405 (STM32F405) OSD: Built-in BetaFlight OSD (STM32 controls the OSD chip through SPI in DMA mode) Receiver: Support Frsky XM / XM + receiver / for Futaba receiver / Flysky receiver / TBS Crossfire receiver / DSMX receiver |
30A Blheli_S 2-4S ESC | Support PWM, Oneshot125, Oneshot42, Multishot, Dshot300, Dshot150, Dshot600 Input voltage: 2S-4S Lipo Continuous current: 30A Peak current: 35A Firmware: BLHELI-S GH-30 |
FOXEER Arrow MICRO PRO Camera | Image sensor: 1/3 inch SUPER HAD II CCD + Nextchip 2040 DSP Pixel: PAL: 976 (H) x494 (V) P/n system: PAL Resolution: 600TVL (color) 650TVL (black and white) Synchronization: internal Minimum illumination: 0.01Lux WDR: Support OSD programming board: Support Noise repair: Support DNR: 2D DNR Camera title: Support Image adjustment: Support OSD: Edit name, power, flight time Input power: 5-40V Storage temperature: -40âï½60â Working temperature: -10âï½50â Power consumption: 70mA Low pressure alarm: Support Preset modes: DEF, VIVID, SUNY, CLOUDY, LED TR, USR1 Size: 21.8x21.8mm Weight: 8.7g (not including stand) |
TC5804 PRO VTX | Product name: 5.8G 40CH 0mW / 25mw / 200mw / 600mw VTX switchable Output power and transmission distance: â¥0.5km@25mW, â¥1km to 200mW, â¥2km to 600mW Transmitting power: 0mW / 25mW / 200mW / 600mW Full movie format: NTSC / PAL Input voltage and power consumption: 7V~24V, +12V / 260mA @ 600mW Protocol: SmartAudio Size: 36 * 36 * 6mm Weight: â¤7g (not including antenna) With output power self-check function. Digital tube scanning: frequency point (1-8), frequency band (AE), power (1-3, 0 = 0mw, 1 = 25mw, 2 = 200mw, 3 = 600mw) Weight: 4.5g |
RACERSTAR-5046 Propeller | Brand Name: Racerstar Model: Tornado 5046 Quantity: 4 CW/4 CCW Color: transparent black Material: PC Root thickness: 7mm Mounting shaft: 5mm Maximum propeller width: 17.5mm Length: 5 inches Weight: 5g |
1500mAH 4S 14.8V Battery | Capacity(mAh) : 1500 Cells (s): 4 Weight (g): 143 Length(mm): 70 Width(mm): 335 Height(mm): 32 Connector: XT60 |
FLYSKY I6X remote controller | Item: FS-i6X RC Transmitter Model Type: Fixed-Wing/Gliders/Helicopter RF Range: 2.408-2.475GHz RF Power: < 20dBm RF Channel: 135 Bandwidth: 500KHz 2.4GHz System: AFHDS 2A / AFDHS Modulation Type: GFSK Stick Resolution 4096 Low Voltage Warning: < 4.2V DSC port: PS/2 Port PPM Chargeable: No Antenna Length: 26mm (Dual Antenna) Weight: 392g Power: 6V DC 1.5AA*4 Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight Size: 174x89x190mm On-line Update: Yes Color: Black Certificate: CE0678, FCC ID: N4ZFLYSKYI6X |
FS-A8S Receiver | Brand Name:Flysky Item Name:FS-A8S Receiver Channels: PPM 8CH, i-BUS 18CH Frequency range: 2.408-2.475GHz Band width: 500KHz Band number: 135 RX Sensitivity: -92 dBm Modulation type: GFSK Antenna length: 26mm (Not including brass contacts) Input power supply: 4.0-8.4V Weight: 1.2g Certificate: CE0678, FCCID: N45ZA8S00 Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F |
Package Included:
1 x X220 V2 Frame Kit
1 x Flysky FS-i6X Remote Control
1 x Flysky FS-A8S Receiver
1 x 1500mAH 4S 14.8V Battery
2 x 2207 2550KV Motor CW
2 x 2207 2550KV Motor CCW
1 x PDB-XT60
1 x F405 DJI DUAL BEC V1 Flight Controller
4 x 30A Independent ESC
1 x FOXEER Arrow MICRO PRO Camera
1 x TC5804 PRO VTX
4 x 5046 3-blade Propeller CW
4 x 5046 3-blade Propeller CCW
1 x 30° Camera Mount (For Gopro5/6/7)
1 x Charger
1 x Antenna
2 x Battery Strap
2 x Carbon Wrench