Main Features:
- 3K full carbon fiber, true "X" configuration, 200mm wheelbase, 4mm thick chassis
- Kakute AIO V1.0 main board with the integration of flight controller, OSD and PDB
- Integrated miniOSD, MWOSD firmware preloaded; highly customizable OSD interface
- 1/3 Super HAD II CCD, PAL, 600TVL camera, 2.5mm lens, 140-degree FOV
- 5.8G 600mW image transmission, 40-channel coverage including RaceBand
- 7 - 42V input voltage, 2oz copper PCB ensuring the 120A maximum continuous current
- Reinforced solder pads of trouble-free direct soldering, extremely low profile design
- BetaFlight ready; 3-color LED board controlled by LED strip signal
- Filtered 5V 800mA ( 3.3V 150mA where applicable ) to power peripherals such as GPS, receiver, blackbox etc.
Specifications:
STM32F303CCT6 32-bit processor with 256KB flash
MPU6050 gyroscope / accelerometer
ATmega328P with Adruino Bootloader ( minimOSD )
Micro USB connector for programming
BLHeli - S 20A ESC supports 30A burst current, Oneshot125 and DShot150
2205 2500KV brushless motors
5040 3-blade propellers
Wheelbase: 200mm
Different Versions:
BNF: with FrSky 16CH receiver, compatible with TARANIS
PNP: without receiver
Specification
General |
Brand: FuriBee
Type: Frame Kit Version: PNP |
|---|---|
Motor |
Model: 2205
KV: 2500 CW / CCW: CCW,CW |
Camera |
Video Resolution: 600TVL
Video Standards: PAL Sensor: CCD Lens Diameter: 2.5mm |
Electronic Speed Controller |
Firmware: BLHeli-S
Functions: DShot150,Oneshot125 Continuous Current: 20A Burst Current: 30A |
Dimension and Weight |
Product weight: 0.272 kg
Package weight: 0.729 kg Product size (L x W x H): 17.50 x 17.50 x 4.20 cm / 6.89 x 6.89 x 1.65 inches Package size (L x W x H): 31.00 x 31.00 x 8.00 cm / 12.2 x 12.2 x 3.15 inches |
Package Contents |
Package Contents: 1 x Drone, 4 x Spare Propeller, 1 x Mushroom Antenna, 1 x Camera Bracket, 1 x Battery Strap, 1 x English Quick Start Guide |
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
