GEPRC CineEye 79mm CineWhoop FPV Racing RC Drone PNP/BNF Caddx Turtle V2 1080P HD With 5 Colors Canopy - 159.00 €

Summary:
CineEye’s frame uses a simple structure and high-quality materials as its foundation to build a frame with excellent toughness and strength. The aircraft as a whole has comprehensive protection electronics, excellent flight performance and Smooth handling feel.

CineEye is designed for indoor Micro FPV Quad. Because of its light weight, it has weak wind resistance. With the Turtle V2 high-definition video lens and stable 5.8g 200mW video transmission, whether you are at a family gathering, recording freely or having an exciting indoor FPV race with friends, you can record every exciting moment while flying .

Powerful flight control module “ GEP-12A-F4 “ which is stable and high-performance computing STM32F411 chip combined with MPU6000 gyroscope to ensure flight stability and comfortable feel. Firmware target: MATEKF411 (MK41), built-in Betaflight OSD, integrated LC filter. The flight controller has a silicone shock-absorbing structure, and the adjusted PID has a significant noise reduction effect.

This micro quad is using the GR1102 10000Kv motors, light weight and sufficient power. Using a 300mAh 4.35V high-voltage lithium battery, paired with GEMFAN 1636-4 40mm propeller, this set of power mix brings the strong lift to the Air.

Features:
No Props and guard in the view
Ultra-light weight
HD 1080@60fps
Caddx baby turtle V2 1080P
5 colors canopy included
Reliable electronic equipment, reducing weight

Specifications:
Name: CineEye HD
FC & ESC:GEP-12A-F4
ESC:12A(BLheli_S)
Frame:GEP-CE1.6
Motor: GEPRC GEP-GR 8000KV(3S 450mAh)
Wheelbase: 79mm
Motors:GR1102 10000KV
Propeller: 1.6 inch
VTX:5.8g 200mW
Camera: Caddx baby turtle V2
Weight: 50g (without battery)
Battery 300mAh 3S battery (No inclueded)
Flight time: Almost 4mins in a smooth flight
Receiver: Frsky XM+ / Frsky R9mm / TBS Nano RX / Flysky A8SV2

Specifications(Caddx baby turtle V2):
Image sensor: 1/2.7″ CMOS sensor
Horizontal: 800TVL
TV system: NTSC/PAL changeable
Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
Power Input: DC 4.5-20V
FPV FOV: 155°
Recording FOV: 170°
Mini Illumination: 0.01lux
Image Resolution: 2 Megapixels
Lens: 1.8mm Turbo Eye Lens
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MP4
Audio: Support
Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)
GEP-12A-F4 System:
MCU: STM32F411
IMU: MPU6000 gyro/accelerometer (SPI)
OSD: BetaFlight OSD w/ AT7456E chip
BEC Output: 5V@2A
Mounting holes: 25.5mm*25.5mm
Input voltage 2-4S LIPO
FC Firmware target: MATEKF411
Continuous current: 12A
ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
ESC Firmware target: Blheli_S G_H_30
Current meter: 210
VTX 5.8G 200mW
Power : PIT/25/100/200mW
Antenna interface : IPEX (UFL)
Telemetry: IRC Tramp
Integrated LC Filter

Package Included:
-1 x CineEye HD CineWhoop Drone
-4 x 1636 3-Blade Propellers ( 4 CW & 4 CCW)
-4 x Spare Part Canopy(4 colors)