Specifications:
TheHolybroKakute F4 all-in-one flight controller makes it easy to build your multirotor. It integrates flight controller ( FC ), power distribution board( PDB ), and on-screen display ( OSD ) inone. The Kakute F4 AIO V2's layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
Main Features:
â Supports BetaflightandCleanflight
â BetaFlight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles
â Soft-mountingbuilt in. The IMU ( gyro ) chip on this board is mounted on vibration-isolating foam. Thismeans that thereis no need to soft-mount the board itself
â New high-performance / low-noise / highsensitivity IMU. ICM20689with 6-axis gyro and accelerometer. Can run at up to32kHz
â 2 oz. copper PCB allows up to 120A maximumcontinuous current
â Dedicated bootloader button for easy firmware flashing
â Low-profile design fits into even verycompact frames
â Input voltage 7 - 42V power the board directly from the flight pack, up to 6S
â Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 AIO monitors voltage directly from the battery power lead
â Filtered voltage outputfor clean, noise-free video. On-board regulatorsoutput 5V atup to 1.5A and 3.3V at up to 200mA topower peripherals such asreceiver, video transmitter, FPV camera, or LED strip
â Supports BLHeli pass-through for easy ESC upgrade and configuration
Specifications:
MCU: STM32F405RGT6 32-bitprocessor
IMU: ICM20689 ( SPI )
Barometer: BMP280
USBVCPdriver ( all UARTsusable simultaneously; USB does not take up a UART )
5 hardware UARTS ( UART1, 3, 4, 5,6 )
Supports serial receivers ( SBUS, iBus, Spektrum,Crossfire ) only. PPM and PWM receivers are notsupported
128 Mbit Dataflash chip for Blackbox logging
Dimensions: 35 x 43 x 7mm ( includes USB in height )
Mounting holes: standard 30.5mm square to center of holes
Weight: 7g
TheHolybroKakute F4 all-in-one flight controller makes it easy to build your multirotor. It integrates flight controller ( FC ), power distribution board( PDB ), and on-screen display ( OSD ) inone. The Kakute F4 AIO V2's layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
Main Features:
â Supports BetaflightandCleanflight
â BetaFlight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles
â Soft-mountingbuilt in. The IMU ( gyro ) chip on this board is mounted on vibration-isolating foam. Thismeans that thereis no need to soft-mount the board itself
â New high-performance / low-noise / highsensitivity IMU. ICM20689with 6-axis gyro and accelerometer. Can run at up to32kHz
â 2 oz. copper PCB allows up to 120A maximumcontinuous current
â Dedicated bootloader button for easy firmware flashing
â Low-profile design fits into even verycompact frames
â Input voltage 7 - 42V power the board directly from the flight pack, up to 6S
â Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 AIO monitors voltage directly from the battery power lead
â Filtered voltage outputfor clean, noise-free video. On-board regulatorsoutput 5V atup to 1.5A and 3.3V at up to 200mA topower peripherals such asreceiver, video transmitter, FPV camera, or LED strip
â Supports BLHeli pass-through for easy ESC upgrade and configuration
Specifications:
MCU: STM32F405RGT6 32-bitprocessor
IMU: ICM20689 ( SPI )
Barometer: BMP280
USBVCPdriver ( all UARTsusable simultaneously; USB does not take up a UART )
5 hardware UARTS ( UART1, 3, 4, 5,6 )
Supports serial receivers ( SBUS, iBus, Spektrum,Crossfire ) only. PPM and PWM receivers are notsupported
128 Mbit Dataflash chip for Blackbox logging
Dimensions: 35 x 43 x 7mm ( includes USB in height )
Mounting holes: standard 30.5mm square to center of holes
Weight: 7g
Specification
General |
Brand: Holybro
Type: Flight Controller |
---|---|
Dimension and Weight |
Product weight: 0.0070 kg
Package weight: 0.0240 kg Package size (L x W x H): 6.50 x 6.50 x 2.00 cm / 2.56 x 2.56 x 0.79 inches |
Package Contents |
Package Contents: 1 x Flight Controller Set |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.