PRODUCT DESCRIPTION
Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your for GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
Specification:
- SucceX-E F4 45A flight stack
- XING-E 2207 FPV Motorï¼4S 2750KV )
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch /5.1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
- Weight: 393.4g (without battery)
SucceX-E F4 Flight controller | - MCUï¼STM32F405 - Gyroï¼MPU6000 - Betaflight OSDï¼YES - Blackboxï¼8MB - 4X Uartsï¼1 2 3 6 ) - 8 x Dshot/Proshot/Oneshot output - 8 x individual ESC power/ signal pads - 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX - VTX telemetry: YES - WS2812 led Stripï¼YES - Baroï¼No - Beeperï¼YES - Inputï¼2-6Sï¼Max 8Sï¼ - BECï¼5V/2.5A cont - Firmware target : BETAFLIGHTF4 - Mountingï¼30.5*30.5mmï¼Ï4mm with Grommets Ï3mm - Dimensionsï¼36*36mm - Weightï¼7.6g | |
SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC | - Dimension: 40*43mm - Mounting Holes: 30.5*30.5mm/Φ3mm - Weight: 14.4g - Supports 2-6S Lipo input - STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware - Current sensor: YES - BEC: NO - Supports: DShot150/300/600/1200/MultiShot/OneShot etc. - Target: G-H-30 BLS 16.7 | |
SucceX Force 5.8g 800mW VTX Adjustable | - Item: SucceX-Force 800mW adjustable VTX - Input voltage: - Output voltage/ Max current: 5V 1A - 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mWï¼250mA@500mW, 380mA@800mW - Output 48 frequency points, - PIT/25mW/200mW/400mW/800mW | |
Feature:
- 5mm arm design for more durability
- Easy-Swap arms
- LED illuminated Logo
- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks
Package Included:
- 1x Nazgul5 V2 240mm 5 Inch 4S FPV Racing Drone
- 1x Caddx Ratel, 2.1mm lens camera
- 1x Albatross RHCP SMA 5.8g antenna
- 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
- 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
- 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Additional Suggested Parts (Not Included)
- Battery 4S 1550mAh
- Camera mount for GoPro
No need to worry! All Factory Dumps and Wiring Diagramscan be found on our Google Drive: LINK
