Jumper T18 Lite 2.4GHz 16CH Hall Sensor Gimbal OpenTX Multi-protocol Transmitter JP4IN1 RF Module for RC Drone
OVERVIEW:
The Jumper T18 Lite exterior will contain a black faceplate on the exterior. The Jumper T18 Lite will not have the 915mhz but will use the original 4in1 commonly found in the Jumper T16.
Description:
Brand Name: Jumper
Item Name: T18 Lite Transmitter
Model: T18 Lite
Faceplate: Black
Size: 180*190*58 MM
Gimbal Type: Hall Sensor Gimbal
Weight: 1000g (without battery)
Working voltage: DC7-8.4V
Channels: up to 32 channels (depending on the receiver)
Simulator mode: 3.5mm standard ppm output or USB HID
Display: IPS480*272 (800 * 480 HD IPS touch screen interface reserved - expected to be supported by openTX2.4 and above)
Features:
JP4-in-1 Multi-protocol module included DSM2/X, FrSky, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more
CRSF can be attched to the back JR module bay just like T16
OpenTX firmware
Voice function
Vibration reminder function
USB-C online firmware upgrade
JR/FrSKY compatible module bay on rear side.
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Support telemetry (depending on the receiver)
Up to 16 channels of output (can be extended into 32ch, depending on the receiver)
| T18 Lite | T18 | T18 Pro | |
| Screen | IPS480*272 | IPS480*272 | IPS480*272 |
| 2.4GHz Power | 100mw | 100mw | 100mw |
| 915MHz Power | N/A | 300mw | 300mw |
| MCU | STM32F429 | STM32F429 | STM32F429 |
| SD CARD | 1G | 1G | 1G |
| Working Voltage | DC7-8.4V | DC7-8.4V | DC7-8.4V |
| Faceplate | Black | Carbon | Carbon |
| Gimbal Sensor | Hall | Hall | RDC90 |
| Gimbal | CNC+PPS | CNC+PPS | PC |
| Multi-protocol Module | JP4IN1 | JP5IN1 | JP5IN1 |
| 2.4GHz Antenna | External | Internal | Internal |
| 915MHz Antenna | N/A | External | External |
| Folfable Handle | No | Yes | Yes |
| Zipper Carry Case | No | Yes | Yes |
| Adjusable Backlight | NO | Yes | Yes |
| Neck Strap Hook Balancer | Yes | Yes | Yes |
Package Included:
1 x T18 Lite Transmitter
1 x USB-C Cable
1 x Jumper Orange Neck Strap
