Features:
Carbon Fiber Mini 250 FPV Quadcopter Frame Specifications:
Material: Carbon Fiber and Fiber Glass mix
Size: 220mm diagonally, 175mm wide, 130mm long motor-to-motor;
Maximum Propeller: 5 inch
Motor Mount: M2 12mm - 16mm
Flight Controller Mount: 30.5mm x 30.5mm
Board Camera Mount: 32mm x 32mm
MT1806 2280kv Brushless Motor Specification:
KV: 2280
Max Trust: 460g
No. of Cell: 2-3S
Framework: 12N14P
Propeller: 5 inch - 6 inch
Length: 26.7mm
Shaft: 2mm
Diameter: 23mm
Weight: 18g
12A Simonk ESC Specifications:
Max Continuous Load: 11 amps
Burst Current: 16A / 10sec
BEC: 5v / 1 amp max
Lipo Cells: 2 to 3 cells
Cables are fitted with female 2mm bullet connectors
Weight: 10g
Dimensions: 24mm L x 18mm W x 7mm H ( 29mm in length including capacitor )
15cm signal wire / 5v power
5cm motor wires ( including 2mm bullet connector )
Carbon Fiber Mini 250 FPV Quadcopter Frame Specifications:
Material: Carbon Fiber and Fiber Glass mix
Size: 220mm diagonally, 175mm wide, 130mm long motor-to-motor;
Maximum Propeller: 5 inch
Motor Mount: M2 12mm - 16mm
Flight Controller Mount: 30.5mm x 30.5mm
Board Camera Mount: 32mm x 32mm
MT1806 2280kv Brushless Motor Specification:
KV: 2280
Max Trust: 460g
No. of Cell: 2-3S
Framework: 12N14P
Propeller: 5 inch - 6 inch
Length: 26.7mm
Shaft: 2mm
Diameter: 23mm
Weight: 18g
12A Simonk ESC Specifications:
Max Continuous Load: 11 amps
Burst Current: 16A / 10sec
BEC: 5v / 1 amp max
Lipo Cells: 2 to 3 cells
Cables are fitted with female 2mm bullet connectors
Weight: 10g
Dimensions: 24mm L x 18mm W x 7mm H ( 29mm in length including capacitor )
15cm signal wire / 5v power
5cm motor wires ( including 2mm bullet connector )
Specification
General |
Type: Frame Kit |
|---|---|
Dimension and Weight |
Product weight: 0.320 kg
Package weight: 0.615 kg Product size (L x W x H): 22.00 x 17.50 x 13.00 cm / 8.66 x 6.89 x 5.12 inches Package size (L x W x H): 30.00 x 20.00 x 8.00 cm / 11.81 x 7.87 x 3.15 inches |
Package Contents |
Package Contents: 1 x 250 Quadcopter Frame, 1 x ESC Connection Board, 4 x MT1806 2280KV Brushless Motor, 4 x 12A Simonk ESC, 4 x 5030 Propeller, 1 x CC3D Flight Controller, 4 x Propeller Ring, 2 x Connecting Cable Set, 1 x Accessory Set |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Notice:
Please ensure the RC device is correctly calibrated before first time use. Any damage caused by misuse and/or general wear and tear is not covered by the warranty.
Please ensure the RC device is correctly calibrated before first time use. Any damage caused by misuse and/or general wear and tear is not covered by the warranty.
![DJI Neo - 10 Reasons Buy or [ Not Buy ]. - UCwojJxGQ0SNeVV09mKlnonA](https://i4.ytimg.com/vi/lG4mCfL_Rlw/hqdefault.jpg)
