Meteor 65 Pro

Update on 4/17 The NamelessrRC VTX was not up to expectations so it was repalced with a TBS unify nano pro32. At first I did the zip tie thing with the entenna again but then got an idea. Oh, and a new 3d printer caused a reprint on canopy. The idea was the toothpick mounting board. Yes less weight without but that weight is up high in the quad. However imporbable, it worked. Setting the TBS toothpick mounting board on top of the TPU for the canopy created JUST enough space. I have three packs on another quad I am bulding for my GF and nothng shorted. New printer is amazing and I may be listing these 98a hardness canopies on ebay. See images for cloeups. Why would anyone want to mount a board touching their FC? It makes the center of gravity much better. TBS puts a non conductive epoxy on their Nano pro32 boards and this epoxy is perfectly placed to make contact with the reactor on the jhemcu GSF420 FC. It props up the back a little and the front has just enough light visible to show no contacting on components. On the pink and purple thing in one of the photos (building for my GF) I used my last 0.4g vtx antenna and it mates with the canopy perfectly. 21 grams even after this mod but I think I can get some back with the light weight TBS antenna if I order more. That antenna fits on these canopies quite well with some electronics grade silicone. Flexible. too.

I live in a vacuum cleaner and dont use social media. Dont hear things like the meteror 65 pro has larger props than any other 65mm until year 3 of flying. Everything BetaFPV I bought on year one and on year two blew up upon applying power. Avoided the brand. As much as I like Fractal frames I kinda miss a traditional whoop. That and 35mm ducts on a fractal leaves like 11mm for a camera to fit within. Saw the new T-Motor M0802 and wanted to give them a try, went 22k kv aftter looking over the specs. Old Porches used to race in these "Gulf" colors. Its wet here until Friday when I will post video. JHEMCU GSF420 flight controller, runcam nano3 and a nameless rc VTX I had laying around. Went Mr Shutterbug for the canopy as it was easy to "bulkhead" it with the VTX and the antenna through the hole on the back side of the canopy. Its amazing how strong this canopy is once fastened. Priline TPU at 95A hardness may be the reason and the camera is a good fit too. Priline seems stronger than most TPU's in this color. Did the soldering outsside of the frame and forgot to photo.

Having a file is needed to fit this FC in this frame. Although its a cross style its wide nature will touch plastic on the corners. That and the usb port hits a bar of plastic one will need to file to about 1/2 original width. See upside down photo.