Rekon 7 - 8 inch Version 3

Rekon 7 - 8 inch Version 3

R
Autorius: RotorBuilds
2025-05-12 Rekon 7 Pro Long Range Frame für FPV Piloten | n-Factory.de, 74,95 €

Apie šį buildą

Original Author: StuPa


Rekon 7 - 8 inch Cruiser


My second conversion of a Rekon 7 to 8 inch to test the new DJI O4 Pro :) It just remains a compact frame that has potential.

True to the motto: Rudie's leftover ramp, utilize FPV parts.

The normal frame is more suitable than the PRO version, even if you only want to convert to 7.5 inches.


I have also converted the DJI Goggle 3 to an external battery (Battery Mod)


My components:


Rekon 7" LR frame not PRO version

(converted to 8 inch with own sidebars supports)

SpeedyBee F405 V4+50A ESC

Emax Eco 2 2807 1700 Kv (4s) motors

HQ 7,5x4,6x3 (currently being tested) or 8x4x3 propeller

HGLRC M100 mini GPS

DJI O4 Pro


Flown with 18650 or 21700 Liion cells.


I will add technical data

X/X


General best tip:

Shield the cable from the GPS module. I previously had severe problems (indifferences) with the Caddx Vista/ o3 and rarely to hardly any GPS lock. I shielded the signal cable RX+TX AND the ground+5V cable and soldered each separately to ground. Since then I have very fast GPS lock with >20 satellites and the warm start is just top < 5s.


PID tuning:

7" preset from UAVTech, which I have refined and adapted for Betaflight 4.6. Flies well with it, but needs further refinement as my setup is from my Rekon 8 6s-version.


Conversion DJI Goggle 3 to external battery:

->

Goggle 3 external battery mod




Here's a new conversion for the DJI Goggle 3 to an external battery. This allows you to use a different headband.

And another modification: now the cable no longer bothers my face.


New position for antenna 2 + new foldable Gemfan 8041 ;) and GPS with MAG for testing.












Source: RotorBuilds.com

Galerija