S4 (4" FRAME / 4s) O4 PRO

S4 (4" FRAME / 4s) O4 PRO

R
Autorius: RotorBuilds
2026-07-04

Apie šį buildą

Original Author: SebFPV


This is my latest project: a 4-inch drone, a size I really enjoy, powered by a 4S 18650 Li-ion battery pack.


Since the selection of 4-inch frames is quite limited, I tested several designs before deciding to create my own ideal frame from the ground up.


The frame is made from unibody T700 carbon fiber to eliminate the possibility of the arms loosening after repeated impacts. The main plate is 4 mm thick, while the camera plates and top plate are 2 mm thick. I also chose 16 mm aluminum standoffs to keep the frame as compact and lightweight as possible.


The low-profile layout positions the Li-ion battery as close as possible to the propeller plane, helping to centralize the mass and improve flight characteristics. The arm geometry also provides enough clearance for ultra-wide-angle recording with the O4 Pro Air Unit, keeping the propellers completely out of the wide HD footage.


To minimize the overall stack height, I used a SpeedyBee V2 AIO flight controller. The 1505 3450KV motors are highly efficient, giving the quad a responsive, agile feel without making it overly aggressive.


I recently switched to AMPACE JP30 cells, which handle high current loads better than the Molicel P30B while maintaining excellent performance.


The O4 Pro Air Unit delivers outstanding image quality, and the footage remains free of noticeable jello thanks to the frame's rigidity and clean vibration characteristics.


The bare frame weighs just 50 g, excluding the TPU components. The fully assembled drone weighs 193 g without the battery, and the 4S Li-ion pack adds another 208 g.


This has been one of my most satisfying builds to date. There is something uniquely rewarding about flying a drone that I imagined, designed, and assembled entirely from scratch.



Source: RotorBuilds.com

Galerija