Spezilicious 65 Lite - 17.95g with 35mm props

Original Author: SpeziLover

Spezilicious 65 Lite - 17.95g pusher whoop with 35mm props

LATEST V4 LOOK HERE: https://rotorbuilds.com/build/32011

This is my latest Spezilicious 65, a lite version of my pusher conversion of the Betafpv Meteor Pro Frame. You do not know this project? Please check first --> https://rotorbuilds.com/build/30955
The Lite kit is the same as the Spezilicious 65 with carbon, however the top plate is printed as a mixed print. In the past I have worked with mixed prints. A 3D print model that is composed of several filaments in one print. More details about my mixed printing here: https://rotorbuilds.com/build/30448

The Lite Spezi
The Top plate is made of PLA+ and TPU95. It is a 0.5 g lighter top plate than the carbon version.
Over the last months I have been experimenting with the Lipo mounts of the Spezilicious. The first versions with a large TPU lipo mount were a bit heavy. Today the lipo mounts are much smaller and lighter. The large lipo slot for Bonka 1s 300mah and similiar is now -0.4g lighter, and for liposticks it is even -0.6g lighter. In addition, the battery mount have been adapted so that they can be mounted on the outside of the Betafpv Meteor Pro frame and no longer on the stack screws, meaning that the battery mounts can be quickly changed. (Except for the minimalized Lipomount for 300 liposticks. This still has to be mounted on the stack screws, but is by far the lightest in weight.)
The lipomounts are free to print: https://www.thingiverse.com/thing:6250522/files.
If you buy one of my kits you get every lipo mount so you can play with them and choose what you prefer.

The Spezilicious 65 Lite