Techninės specifikacijos
Basic Information
Weight
3.2g
Price
28.39 €
Integrated Circuits
Barometer
SPL06-001
Specifications
Blackbox
MicroSD Card Slot
Product Name
SpeedyBee F405 WING MINI Wireless USB Extender
MCU
STM32F405, 168MHz, 1MB Flash
USB Port Type
Type-C
OSD Chip
AT7456E
UART
6 sets (UART1, UART2, UART3, UART4, UART5, UART6 - Dedicated for Wireless board Telemetry connection)
I2C
1x
Buzzer
5V Active Buzzer
Supported FC Firmware
INAV: SpeedyBeeF405WING (default)
TVS Protective Diode
Yes
IMU(Gyro&Accelerometer)
ICM-42688-P
ADC
4x
PWM
12x (9x pin headers + 2x solder pads + 1x "LED" pad)
ELRS/CRSF receiver
Supported, connected to UART1
SBUS
Built-in inverter for SBUS input (UART2-RX)
LED
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red)
Input voltage range
7~36V (2~6S LiPo)
Battery Voltage Sensor
Connect to FC board VBAT, 1K:10K
Battery Current Sensor
80A continuous, 150A peak Connect to FC board Current
FC BEC output
Output 5.2V +/- 0.1V DC Continuous current 2 Amps, 3A Peak
Servo BEC output
Output 5V +/- 0.1V DC Continuous current 4 Amps, 5A Peak Voltage adjustable, 5V Default, 6V via jumper
INAV
SpeedyBeeF405WING (default)
Connect to FC board VBAT, 1K
10K
Analog RSSI
Supported, Named as "RS"
Dual Analog Camera Switching
Default to Camera1 Video Input (C1). Switch between C1 and C2 using INAV Modes/USER. Both cameras should have the same video format, either PAL or NTSC.
VTX & Camera power supply
The VTX power interface Vv offers two power supply options: direct battery voltage or integrated BEC 5V,By default, it is set to battery voltage (Ensure the VTX and camera input voltage range is compatible) Switching to 5V power supply is possible vi
