Techninės specifikacijos

Basic Information

Weight
7g
Price
75.72 €

Integrated Circuits

Barometer
N/A

Specifications

Firmware
BLHeli_S JH40
Dimension
35 * 35 * 5.5mm
Product Name
SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs
WiFi
Not supported
Power Input
3-6S LiPo
Mounting
20 x 20mm, 3.6mm hole diameter
MCU
STM32F722
IMU(Gyro)
BMI270 for current batches; MPU6000 for old batches before May 2022.
USB Port Type
Type-C
OSD Chip
AT7456E chip
BLE Bluetooth
Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART 6)
BetaFlight Camera Control Pad
Yes(CC pad)
5V Output
6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A.
9V Output
2 groups of 9V output, the total current load is 2A.
3.3V Output
Supported. Up to 500mA current load.
UART
Full UART * 3(UART1, UART2, UART3)
ESC Telemetry
Not supported
I2C
Not supported
Buzzer
BZ+ and BZ- pad used for 5V Buzzer
BOOT Button
Used to enter DFU mode
RSSI Input
Not supported
Supported Flight Controller Firmware
BetaFlight(Default)
Firmware Target Name
SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022.
Continuous Current
35A * 4
Burst Current
45A(5seconds)
ESC Protocol
DSHOT300/600
Power Output
VBAT
Current Sensor
Support (Scale=250 Offset=-500)
SmartPort
Use any TX pad of UART for the SmartPort feature.
Flash FC Firmware Wirelessly
Not supported. Please update firmware for this FC on the PC
Download/Analyze Blackbox
Not supported. Please download and analyze Blackbox data on the PC
DJI Air Unit Soldering Pads
Supported
Flash(for BlackBox)
8MB
ESC Signal Pads
M1 - M4
ESC Telemetry UART
R4(UART4)
LED Pad
Used for WS2812 LED