Bix3 FPV
So, this is around the 10th flight.. final flight until the new motor arrives.
Basically, one of the screws that held the motor onto the mount became lose -- probably because I had no idea what i was doing and left the prop a bit too unbalanced. The shaking (that you can see almost right away on the rear camera) eventually rubbed two of the motor wires bare. They shorted and the motor was done. Since I only have a forward FPV cam, i had no idea the motor had stopped since there isn't anything to hear when its far away. I thought the dragonlink cable got stuck in the elevator or something. I kept telling my spotter "i can go down, but not up.. its like the elevator is stuck" Noob lesson learned.
