This is a video of my Blade Inductrix FPV Pro and how it does NOT want to respond to stick controls when going up & down.
Watching other videos on YT and also flying with other Tiny Whoops and such, they all respond quickly why flying... mine... yeah, not so much.
Flying level at any height, then snap to full throttle, then down, then back up, will let the quad rise about 2' then literally drop to the floor, then rise real slow.
Everything on the quad is stock except for 3 mods.
Changed the battery connector & wire to JS2.0, 18000 motors and batteries I'm using BetaFPV 250mah.
Been all over YT and some other forums, wondering if I need to flash this with a newer version of Betaflight, or just replace the FC with a different one.. or just get a Tinywhoop???
I'm lost on what to do. It's frustrating not being able to fly decent enough to keep learning on this.
I do fly other quads and they react as quickly as I use the sticks.
ANY SUGGESTIONS????
Thanks for watching.
Blade Inductrix Pro
Tattu 3.7mah 1S battery 30C/60C
BetaFPV 3.7 mah 1S HV Battery 4.35V. 30C/60C
Boldclash 1S 3.7 mah Battery 30C/60C 0.925WH
Spektrum DX8 Dinasour!!!! as per Horizon Hobby
AOMWAY Commander V1 FPB Goggles
Fat Shark Attitude V1 (modded with 5.8mhz Nexwave Receiver & Dominator V3 face plate w/fan)
