NewBeeDrone StingerBee, a 120mm 3" micro built to compete with the big boys. Watch as I build this tiny FPV speedster from start to finish, and weigh in at under 230g AUW!
Full Build: http://rotorbuilds.com/build/825
Notes:
- This is a tiny build! Regular-sized ESCs likely will not fit. A 4-in-1 ESC like the LittleBee 4x is recommended. I used ESCs that are smaller than normal LittleBees and it was a tight fit.
- I used a DTFc, which is a combination PDB and flight controller, this allowed me to use slightly shorter standoffs
- The StingerBee is built for a full-size camera like the HS1177. My shipment of cameras was delayed, so I decided to use a micro cam I had around.
NewBeeDrone StingerBee
DTFc Flight Controller
ARM Racing V2 18a ESC
RCX 1407 3800kv Motors
XSR Receiver
Hawkeye VTX
Micro CMOS Cam
Propsman HQProp 3045 quadblade propellers