＊特點＊
●剝皮長度變化方式，採用全螢幕電腦觸控方式調整，變換剝皮長度快速又方便。
●採用伺服馬達控制系統完成定寸、裁線、剝皮、半剝、沾錫等各相關時間動作會自動搭配調整，
使精度更準確，操作更簡單、性能更穩定。
●本機操作方式可分為：分解動作、單行程動作及自動等方式，採用面板觸控方式變換，操作簡單
又方便。
●設計有檢測裝置，異常時能自動停機，並將檢出狀況顯示於控制面板，方便快速排除狀況以減少
停機時間。
●扭線方式採用三個夾爪旋轉方式，利用馬達帶動旋轉，並可調整旋轉速度來改變扭線之緊度，使
扭線達到又直又漂亮。
●本機沾錫角度接近90度點沾，使線徑沾錫度平均(點沾深度準確)。
●本機夾線位置與沾錫端點可調至約6mm，以控制線材沾錫端不易彎曲，點沾位置更精確。
●錫面上錫屑設計有自動撥錫之功能，使沾錫處無錫屑之情形。
●錫面設計有自動補錫的功，使線材沾錫的位置更加準確。
●設計有100組記憶功能，可縮短更換線材調整之時間。
＊規格＊
電源：AC 220V／380V 50／60 Hz 三相
電線規格：AWG#20~30 (線材OD 2.5~0.5mm)
空氣壓力：0.5～０.6Mpa (需使用清潔乾燥空氣)
速度：3000條／小時 (50 mm長以內)
裁切長度：設定長度28～90 mm 標準（PVC膠長最短23mm）
剝皮長度：前端 側0～10mm；後端 側０～7mm
功能：電線定寸切斷、單端剝皮、雙端剝皮、單端半剝、雙端半剝、單端扭線、雙端扭線、單端沾錫、雙端沾錫
檢出裝置：電線有無、電線接頭、電線過載、氣壓低下
本體尺寸：2,000 L x 1,200 W x 1,300 H mm
重量：約420 kgs
＊Features＊
●Variable stripping lengths: Touch screen operations display. The wire strip length can be adjusted on the main control panel.
●Servo motor control system to complete fixed-inch, wire cutting, stripping, crimping terminals, semi-stripping soldering and other actions, the action will automatically match the relevant time adjustment.
●Operating method: Manual, single cycle and Auto (Continuous).
●Design detection device, an exception can be automatically shut down, and the detected position of the display on the control panel, convenient and fast rule out conditions to minimize downtime.
●Wire twist is made possible by 3 rotary claws driven by motors. Adjustable rotation speeds help change tension of the twisted wires and keep them straight and neat.
●The quasi-90° tin dipping angle of the machine provides even tin dipping to the wire (in precise dipping depths).
●With the wire holding position and the tin-dipping tip adjustable to 6 mm, this machine keeps the tin dipping end of the wire from curving, assuring precise dipping positions.
●An automatic wiper is provided to remove tin chips from tin bath.
●The 100 sets of memory files can be saved or retrieved for required actions.
＊Specifications＊
Power supply: AC 220∕380V 50∕60 HZ 3 phases
Wire size: AWG# 20～30 (Wire OD 2.5 ~ 0.5mm)
Air pressure: 0.5～0.6 Mpa
Speed: 3000 pcs-hr (50 mm)
Cut length of wire: Cable length 28～90 mm (PVC length shortest 23mm)
Stripping length: Front end side 0~10mm; Rear end side 0~7mm
Capacity：Cutting wire, stripping on one end, stripping both ends, half-stripping on one end, half-stripping both ends, twister on one end , twister both ends, on one end tin dipping, both ends tin dipping
Detectors equipped: Without wires,wire joint, wire overload, air presser low
Dimensions: 2,000 L×1,200 W×1,300 H mm
Weight: Approx. 420 Kgs
