Please read below
If you have highspeed connection please click 1080P setting for best quality for video
PLEASE SEE Update July 12/2013 - it seems i missed the "thread guide on the needle clamp" see video here http://www.youtube.com/watch?v=n8SlyQAGljs
- I am not expert, this is my first sewing machine and I have only used it for maybe 1 hour.
- I don't know if this is the right or wrong way to do this threading procedure but this is how I figured out how to do it.
- This is video of how to thread the top and bottom of the machine. The most confusing part for me was understanding I had to bring up the lower thread when I first got the machine. In this video after I show you how to install the bobbin case I will show how to bring up the lower thread 2 or 3 times from different angles.
- When turning the needle down to bring up the lower thread turn the knob on the side of the machine counter-clockwise. Don't use the pedal, use the knob because the pedal is too fast.
-it might take you a couple of times to understand how to bring up the lower thread as it might not work on the first try or you may get a tangle. Just remove the case and bobbin and free any tangles and try again.
0:50 - how to wind thread on the lower bobbin
3:09 how to thread the top thread
6:43 How to install and remove lower bobbin case , how to open latch
8:32 How to install lower bobbin and thread into bobbin case
13:44 How to bring up the lower thread , multiple angles
this is video of how to thread top and bottom on a ls-2000 brother sewing machine
