MakerBot Quick Tips #7 - Multiply

MakerBot Quick Tips #7 - Multiply
STL files generally contain a single copy of a model. Printing several copies requires starting a new print for each copy. Fortunately ReplicatorG has an option in Skeinforge called Multiply, which allows you to print multiple copies in a single print.
In this video I show a variety of 3D prints for Halloween, using the Multiply option to create 12 prints in a single pass.
Links to the model files shown in this video:
Parametric Spider Web
http://www.thingiverse.com/thing:4383
Infill: 10%
Layer Height: .2mm
# Shells: 1
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Black
Spider
http://www.thingiverse.com/thing:1195
Infill: 20%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Black
Material: MakerBot 1.75mm ABS Safety Orange
Frosty cookie cutter
http://www.thingiverse.com/thing:5279
Infill: 25%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Natural
Pumpkin fridge magnet
http://www.thingiverse.com/thing:12565
Infill: 15%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Green
Material: MakerBot 1.75mm ABS Safety Orange
Ghost fridge magnet
http://www.thingiverse.com/thing:12558
Infill: 15%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Black
Material: ProtoParadigm 1.75mm ABS Natural
Halloween Bat Fridge Magnet 
http://www.thingiverse.com/thing:12587
Infill: 15
Layer Height: .2
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: MakerBot 1.75mm ABS Safety Orange
Jack-O-Lantern
http://www.thingiverse.com/thing:31395
Infill: 15%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: MakerBot 1.75mm ABS Safety Orange
Material: ProtoParadigm 1.75mm ABS Green (Pumkpin Stem)
Gingerbread Skeleton
http://www.thingiverse.com/thing:13675
Infill: 25%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Natural
Dark Knight Rises Batarang
http://www.thingiverse.com/thing:26130
Infill: 20%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Black
Halloween Spiderccino or A Spider Cappuccino Stencil
http://www.thingiverse.com/thing:12954
Infill: 20%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Black
Ghost Bookmark
http://www.thingiverse.com/thing:3515
Infill: 10%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Natural
Material: MakerBot 1.75mm ABS Safety Orange
Halloween Gourdo
http://www.thingiverse.com/thing:31149
Infill: 15%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Natural
Great Pumkin
http://www.thingiverse.com/thing:31264
Infill: 10%
Layer Height: .2mm
# Shells: 2
Feed Rate: 58mm/sec
Travel Feedrate: 108mm/sec
Extruder Temperature: 240C
Build Platform Temperature: 110C
Material: ProtoParadigm 1.75mm ABS Natural
Software used in this video:
ReplicatorG
http://replicat.org/
Skeinforge (included with ReplicatorG)
http://www.makerbot.com/docs/software/skeinforge/
OpenSCAD
http://www.openscad.org/
If you are interested in 3D printing, please click the thumbs up icon and then subscribe to this channel for a series of demonstrations and how-to videos. If you have a question or comment, you can post in the comments below. Thanks for watching BusyBotz!