In part II of the ProtoThrottle video series, I show how to program a Soundtraxx Tsunami2 decoder for optimal use with the ProtoThrottle. I am using my Digitrax Super Chief with DT402 throttle for the programming. Please note, this is for informational purposes only, I a not responsible for any errors you encounter. On the Tsunami2 decoders, setting CV8 to a value of 8 resets the decoder to factory settings. If you encounter issues, resetting the decoder solves the majority of the issues. Please comment if you have any questions or if you have a more efficient method of programming the decoder.
Here is a summary of the CV changes:
CV3 = 200
CV4 = 255
CV31 = 16
CV 1.257 = 0
CV 1.258 = 19
CV 1.259 = 5
CV 1.260 = 5
CV 1.261 = 6
CV 1.262 = 6
CV 57 = 63
CV 58 = 63
For more information, please visit this post from the Iowa Scaled Engineering Blog: https://www.iascaled.com/blog/how-do-i-configure-headlights-for-the-protothrottle/
For the Soundtraxx Tsunami2 manuals, please visit: http://www.soundtraxx.com/manuals.php
For general information, please join the ProtoThrottle IO group: https://groups.io/g/ProtoThrottle/topics
