Testing all kind of the myrcmart 5" props on the rcx h2206 2250kv motors with 4s lipo 25C
Props tested:
-5x3gm
-5x4gm
-5x4 carbon and nylon
-5x4.5gm
-5x4.5 carbon and nylon
-5x4.5fm
-5x4 surveilzone DAL
Final conclusions:
If you want more flight time, 5x3gm are your props, followed by the 5x4gm which I have only noticed a few seconds less of flight time.
If you want thrust, 5x4gm works the best for me, closely followed by the 5x4.5gm. I think this is due to more prop area on the 5x4 props.
I removed the video tests of the reinforced version of the 5x4 and the 5x4.5 props because I found they perform the same or even worst (in the case of the 5x4 reinforced) than the plastic version.
Also I don't show the 5x4.5fc because they perform the same than 5x4.5gm but with lots of vibrations in my case (I think due to the adaptors they use to fit the axle)
5x4 surveilzone props works very bad for me, so I only show them on the vertical climb.
Flight times with 4s 1300mah 25C (to low C, I know..)
-5x3gm 3:40
-5x4gm 3:38
-5x4 carbon and nylon 3:32
-5x4.5gm 3:10
-5x4.5 carbon and nylon 3:30
-5x4.5fm 3:06
-5x4 surveilzone DAL 3:00
I have noticed that myrcmart have received 5x4.6 bullnose props! I'm very excited to test them soon!
I hope to help somebody!
Edited: I have replaced my lipos with a new ones of 40-80C, the thrust comparison is f*cking awesome!! I will never use the 25C more haha
