Melissa walks you through the process of measuring your fireplace for a fireplace grate.
Ensuring the correct measurements is an important process when purchasing a new fireplace grate. There are two simple steps and you will need a measuring tape, paper and a pen or pencil.
We recommend that you wear some clothing that you don't mind getting dirty, because there is a good chance you will get dirty
Step 1 - Measuring the Width:
Measure the width of your fireplace opening in the very back of your fireplace and write this measurement down.
Measure the width of your fireplace opening in the very front of your fireplace and write this measurement down.
Now that you have both the back width and front width, take the smallest measurement and subtract 6 inches from this measurement. For example, your back width is 42 inches and your front width is 46 inches, then you would use the back width and subtract 6 inches, which would give you a final width of 36 inches.
Step 2 - Measuring the Depth:
Measure the depth of your fireplace from the fireplace door, or from the beginning of the fireplace opening and write this measurement down.
Now that you have your depth measurement, subtract 6 inches from this measurement.
Ideally, you should have about 3" on all sides of the grate to ensure proper function & air flow.
With these measurements, you now have a guide to start shopping for a new fireplace grate! We hope this helped and feel free to give us a call toll-free at 1-866-667-8454, if you have any other questions.
